Honda

Honda

Sort by:
15% OFF
Cusco - 30mm Front Anti Roll Bar - Honda Odyssey RA1/RA2 - 355 311 A30
{"id":8190381588755,"title":"Cusco - 30mm Front Anti Roll Bar - Honda Odyssey RA1\/RA2","handle":"cusco-30mm-front-anti-roll-bar-honda-odyssey-ra1-ra2-355-311-a30","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 355 311 A30\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?30, 140% Compare To Standard *Standard ?28mm. Re-Use Your Oem Bushings.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:54:12+08:00","created_at":"2023-03-20T14:54:13+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1994","1995","1996","1997","1998","1999","2-points","anti-roll-bars","cusco-japan","cusco-japan30","front","honda","JP1","odyssey-ra1-1994-1997-na-f22b-i4","odyssey-ra2-1997-1999-na-f22b-i4","steel","tva","ws126"],"price":46120,"price_min":46120,"price_max":46120,"available":true,"price_varies":false,"compare_at_price":54400,"compare_at_price_min":54400,"compare_at_price_max":54400,"compare_at_price_varies":false,"variants":[{"id":44654429798675,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"355 311 A30","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - 30mm Front Anti Roll Bar - Honda Odyssey RA1\/RA2","public_title":null,"options":["Default Title"],"price":46120,"weight":12000,"compare_at_price":54400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_98e989f4-4d77-4887-842b-a109a2d8b198.jpg?v=1679295253"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_98e989f4-4d77-4887-842b-a109a2d8b198.jpg?v=1679295253","options":["Title"],"media":[{"alt":"Cusco - 30mm Front Anti Roll Bar - Honda Odyssey RA1\/RA2 - 355 311 A30","id":33392634265875,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_98e989f4-4d77-4887-842b-a109a2d8b198.jpg?v=1679295253"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Front_anti_roll_bar_98e989f4-4d77-4887-842b-a109a2d8b198.jpg?v=1679295253","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 355 311 A30\u003cbr\u003eBar Type: Anti Roll Bar\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Steel\u003cbr\u003eManufacturer Notes: ?30, 140% Compare To Standard *Standard ?28mm. Re-Use Your Oem Bushings.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.\u003cbr\u003e\u003cbr\u003eThe Cusco anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. \u003cbr\u003eThe larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003eDesigned for simple installation and set-up (if adjustable).\u003cbr\u003eSolid or hollow internal structure. (Depends on vehicle application)\u003cbr\u003eCan be used with factory hardware or included Cusco hardware, bushings and end links.\u003cbr\u003e\u003cbr\u003eBENEFITS\u003cbr\u003eIncreased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component.\u003cbr\u003eADJUSTABLE \u0026amp; NON-ADJUSTABLE\u003cbr\u003e\u003cbr\u003eCUSCO Provides two types, adjustable and non-adjustable. The adjustable type allows high or low settings with ease. Stabilizes your high speed driving, and sharpens the cornering performance.\u003cbr\u003eREAR ADDITIONAL SWAY BARS\u003cbr\u003e\u003cbr\u003eCusco offers rear additional sway bars for vehicles not originally equipped with anti-sway bars. These can minimize unwanted sway or rolling movement without sacrificing a comfortable ride.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003c!--split--\u003e"}
Cusco - 30mm Front Anti Roll Bar - Honda Odyssey RA1/RA2 - 355 311 A30

Cusco - 30mm Front Anti Roll Bar - Honda Odyssey RA1/RA2

€461,20

Specifications:Manufacturer: Cusco JapanPart Number: 355 311 A30Bar Type: Anti Roll BarPosition: FrontPoints: 2 PointsMaterial: SteelManufacturer Notes: ?30, 140% Compare To Standard *Standard ?28mm. Re-Use Your Oem Bushings.The Cusco anti-sway bars replace the factory anti-sway bars, (if equipped) and uses the factory mounting locations.The Cus...


More Info
10% OFF
Cusco - Front Strut brace Type AS - Honda Odyssey RA1/RA2/RA3/RA4 - 340 510 A
{"id":8190366155027,"title":"Cusco - Front Strut brace Type AS - Honda Odyssey RA1\/RA2\/RA3\/RA4","handle":"cusco-front-strut-brace-type-as-honda-odyssey-ra1-ra2-ra3-ra4-340-510-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 340 510 A\u003cbr\u003eBar Type: Strut brace Type AS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Type AS Aluminum Circular Shaft features a lightweight aluminum shaft bar, hollow to reduce the weight and increase the rigidity.\u003cbr\u003e\nThe steel end plate brakets are painted in the trademarked Cusco blue provide flawless fitment.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003cbr\u003eOdyssey | RA3 | 1994-1999 | NA | F23A | I4\u003cbr\u003eOdyssey | RA4 | 1994-1999 | NA | F23A | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:49:13+08:00","created_at":"2023-03-20T14:49:13+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1994","1995","1996","1997","1998","1999","2-points","aluminium","cusco-japan","cusco-japan30","front","honda","JP1","odyssey-ra1-1994-1997-na-f22b-i4","odyssey-ra2-1997-1999-na-f22b-i4","odyssey-ra3-1994-1999-na-f23a-i4","odyssey-ra4-1994-1999-na-f23a-i4","strut-bars","tva","ws126"],"price":27310,"price_min":27310,"price_max":27310,"available":true,"price_varies":false,"compare_at_price":30400,"compare_at_price_min":30400,"compare_at_price_max":30400,"compare_at_price_varies":false,"variants":[{"id":44654262255891,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"340 510 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace Type AS - Honda Odyssey RA1\/RA2\/RA3\/RA4","public_title":null,"options":["Default Title"],"price":27310,"weight":9000,"compare_at_price":30400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_94f3039e-ef54-47ad-8067-a3a10cec57e0.jpg?v=1679294953"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_94f3039e-ef54-47ad-8067-a3a10cec57e0.jpg?v=1679294953","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace Type AS - Honda Odyssey RA1\/RA2\/RA3\/RA4 - 340 510 A","id":33392564011283,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_94f3039e-ef54-47ad-8067-a3a10cec57e0.jpg?v=1679294953"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_94f3039e-ef54-47ad-8067-a3a10cec57e0.jpg?v=1679294953","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 340 510 A\u003cbr\u003eBar Type: Strut brace Type AS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Type AS Aluminum Circular Shaft features a lightweight aluminum shaft bar, hollow to reduce the weight and increase the rigidity.\u003cbr\u003e\nThe steel end plate brakets are painted in the trademarked Cusco blue provide flawless fitment.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003cbr\u003eOdyssey | RA3 | 1994-1999 | NA | F23A | I4\u003cbr\u003eOdyssey | RA4 | 1994-1999 | NA | F23A | I4\u003c!--split--\u003e"}
Cusco - Front Strut brace Type AS - Honda Odyssey RA1/RA2/RA3/RA4 - 340 510 A

Cusco - Front Strut brace Type AS - Honda Odyssey RA1/RA2/RA3/RA4

€273,10

Specifications:Manufacturer: Cusco JapanPart Number: 340 510 ABar Type: Strut brace Type ASPosition: FrontPoints: 2 PointsMaterial: AluminiumThe Cusco Type AS Aluminum Circular Shaft features a lightweight aluminum shaft bar, hollow to reduce the weight and increase the rigidity. The steel end plate brakets are painted in the trademarked Cusco b...


More Info
12% OFF
Cusco - Front Strut brace Type OS - Honda Odyssey RA1/RA2/RA3/RA4 - 340 540 A
{"id":8190365991187,"title":"Cusco - Front Strut brace Type OS - Honda Odyssey RA1\/RA2\/RA3\/RA4","handle":"cusco-front-strut-brace-type-os-honda-odyssey-ra1-ra2-ra3-ra4-340-540-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 340 540 A\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003cbr\u003eOdyssey | RA3 | 1994-1999 | NA | F23A | I4\u003cbr\u003eOdyssey | RA4 | 1994-1999 | NA | F23A | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:49:09+08:00","created_at":"2023-03-20T14:49:10+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1994","1995","1996","1997","1998","1999","2-points","aluminium","cusco-japan","cusco-japan30","front","honda","JP1","odyssey-ra1-1994-1997-na-f22b-i4","odyssey-ra2-1997-1999-na-f22b-i4","odyssey-ra3-1994-1999-na-f23a-i4","odyssey-ra4-1994-1999-na-f23a-i4","strut-bars","tva","ws126"],"price":29960,"price_min":29960,"price_max":29960,"available":true,"price_varies":false,"compare_at_price":34100,"compare_at_price_min":34100,"compare_at_price_max":34100,"compare_at_price_varies":false,"variants":[{"id":44654257537299,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"340 540 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Front Strut brace Type OS - Honda Odyssey RA1\/RA2\/RA3\/RA4","public_title":null,"options":["Default Title"],"price":29960,"weight":9000,"compare_at_price":34100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_7cd53819-f9b7-4ecb-8d33-84d4f6468b5c.jpg?v=1679294950"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_7cd53819-f9b7-4ecb-8d33-84d4f6468b5c.jpg?v=1679294950","options":["Title"],"media":[{"alt":"Cusco - Front Strut brace Type OS - Honda Odyssey RA1\/RA2\/RA3\/RA4 - 340 540 A","id":33392563618067,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_7cd53819-f9b7-4ecb-8d33-84d4f6468b5c.jpg?v=1679294950"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_7cd53819-f9b7-4ecb-8d33-84d4f6468b5c.jpg?v=1679294950","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 340 540 A\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Front\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003cbr\u003eOdyssey | RA3 | 1994-1999 | NA | F23A | I4\u003cbr\u003eOdyssey | RA4 | 1994-1999 | NA | F23A | I4\u003c!--split--\u003e"}
Cusco - Front Strut brace Type OS - Honda Odyssey RA1/RA2/RA3/RA4 - 340 540 A

Cusco - Front Strut brace Type OS - Honda Odyssey RA1/RA2/RA3/RA4

€299,60

Specifications:Manufacturer: Cusco JapanPart Number: 340 540 ABar Type: Strut brace Type OSPosition: FrontPoints: 2 PointsMaterial: AluminiumCusco Strut Tower Bars Type OS, Oval Shaft designCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect bala...


More Info
10% OFF
Cusco - Rear Strut brace Type AS - Honda Odyssey RA1/RA2/RA3/RA4 - 355 511 A
{"id":8190366286099,"title":"Cusco - Rear Strut brace Type AS - Honda Odyssey RA1\/RA2\/RA3\/RA4","handle":"cusco-rear-strut-brace-type-as-honda-odyssey-ra1-ra2-ra3-ra4-355-511-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 355 511 A\u003cbr\u003eBar Type: Strut brace Type AS\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Type AS Aluminum Circular Shaft features a lightweight aluminum shaft bar, hollow to reduce the weight and increase the rigidity.\u003cbr\u003e\nThe steel end plate brakets are painted in the trademarked Cusco blue provide flawless fitment.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003cbr\u003eOdyssey | RA3 | 1994-1999 | NA | F23A | I4\u003cbr\u003eOdyssey | RA4 | 1994-1999 | NA | F23A | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:49:14+08:00","created_at":"2023-03-20T14:49:15+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1994","1995","1996","1997","1998","1999","2-points","aluminium","cusco-japan","cusco-japan30","honda","JP1","odyssey-ra1-1994-1997-na-f22b-i4","odyssey-ra2-1997-1999-na-f22b-i4","odyssey-ra3-1994-1999-na-f23a-i4","odyssey-ra4-1994-1999-na-f23a-i4","rear","strut-bars","tva","ws126"],"price":27310,"price_min":27310,"price_max":27310,"available":true,"price_varies":false,"compare_at_price":30400,"compare_at_price_min":30400,"compare_at_price_max":30400,"compare_at_price_varies":false,"variants":[{"id":44654263075091,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"355 511 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Rear Strut brace Type AS - Honda Odyssey RA1\/RA2\/RA3\/RA4","public_title":null,"options":["Default Title"],"price":27310,"weight":9000,"compare_at_price":30400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_b0da4c8b-bf14-4139-b4a7-07c154fbbeb3.jpg?v=1679294955"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_b0da4c8b-bf14-4139-b4a7-07c154fbbeb3.jpg?v=1679294955","options":["Title"],"media":[{"alt":"Cusco - Rear Strut brace Type AS - Honda Odyssey RA1\/RA2\/RA3\/RA4 - 355 511 A","id":33392564470035,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_b0da4c8b-bf14-4139-b4a7-07c154fbbeb3.jpg?v=1679294955"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_AS_b0da4c8b-bf14-4139-b4a7-07c154fbbeb3.jpg?v=1679294955","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 355 511 A\u003cbr\u003eBar Type: Strut brace Type AS\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eThe Cusco Type AS Aluminum Circular Shaft features a lightweight aluminum shaft bar, hollow to reduce the weight and increase the rigidity.\u003cbr\u003e\nThe steel end plate brakets are painted in the trademarked Cusco blue provide flawless fitment.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003cbr\u003eOdyssey | RA3 | 1994-1999 | NA | F23A | I4\u003cbr\u003eOdyssey | RA4 | 1994-1999 | NA | F23A | I4\u003c!--split--\u003e"}
Cusco - Rear Strut brace Type AS - Honda Odyssey RA1/RA2/RA3/RA4 - 355 511 A

Cusco - Rear Strut brace Type AS - Honda Odyssey RA1/RA2/RA3/RA4

€273,10

Specifications:Manufacturer: Cusco JapanPart Number: 355 511 ABar Type: Strut brace Type ASPosition: RearPoints: 2 PointsMaterial: AluminiumThe Cusco Type AS Aluminum Circular Shaft features a lightweight aluminum shaft bar, hollow to reduce the weight and increase the rigidity. The steel end plate brakets are painted in the trademarked Cusco bl...


More Info
12% OFF
Cusco - Rear Strut brace Type OS - Honda Odyssey RA1/RA2/RA3/RA4 - 355 541 A
{"id":8190366056723,"title":"Cusco - Rear Strut brace Type OS - Honda Odyssey RA1\/RA2\/RA3\/RA4","handle":"cusco-rear-strut-brace-type-os-honda-odyssey-ra1-ra2-ra3-ra4-355-541-a","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 355 541 A\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003cbr\u003eOdyssey | RA3 | 1994-1999 | NA | F23A | I4\u003cbr\u003eOdyssey | RA4 | 1994-1999 | NA | F23A | I4\u003c!--split--\u003e","published_at":"2023-03-20T14:49:11+08:00","created_at":"2023-03-20T14:49:12+08:00","vendor":"Cusco Japan","type":"Bars and Braces","tags":["1994","1995","1996","1997","1998","1999","2-points","aluminium","cusco-japan","cusco-japan30","honda","JP1","odyssey-ra1-1994-1997-na-f22b-i4","odyssey-ra2-1997-1999-na-f22b-i4","odyssey-ra3-1994-1999-na-f23a-i4","odyssey-ra4-1994-1999-na-f23a-i4","rear","strut-bars","tva","ws126"],"price":29960,"price_min":29960,"price_max":29960,"available":true,"price_varies":false,"compare_at_price":34100,"compare_at_price_min":34100,"compare_at_price_max":34100,"compare_at_price_varies":false,"variants":[{"id":44654259536147,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"355 541 A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco - Rear Strut brace Type OS - Honda Odyssey RA1\/RA2\/RA3\/RA4","public_title":null,"options":["Default Title"],"price":29960,"weight":9000,"compare_at_price":34100,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_3d712e02-11c9-4442-ba96-ce4346857699.jpg?v=1679294952"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_3d712e02-11c9-4442-ba96-ce4346857699.jpg?v=1679294952","options":["Title"],"media":[{"alt":"Cusco - Rear Strut brace Type OS - Honda Odyssey RA1\/RA2\/RA3\/RA4 - 355 541 A","id":33392563749139,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_3d712e02-11c9-4442-ba96-ce4346857699.jpg?v=1679294952"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_Type_OS_3d712e02-11c9-4442-ba96-ce4346857699.jpg?v=1679294952","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 355 541 A\u003cbr\u003eBar Type: Strut brace Type OS\u003cbr\u003ePosition: Rear\u003cbr\u003ePoints: 2 Points\u003cbr\u003eMaterial: Aluminium\u003cbr\u003e\u003cbr\u003eCusco Strut Tower Bars Type OS, Oval Shaft design\u003cbr\u003e\u003cbr\u003eCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength.\u003cbr\u003eBrackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application.\u003cbr\u003eTypes: Three center bar types are available, specifically set per application.\u003cbr\u003eInstallation Method: Simple bolt-on type and intended for both front and rear upper strut locations. Important: We recommend purchasing Cusco Strut Bar Quick Release Kits ( Type OS) reference 00B 540 C.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJapan: \u003c\/strong\u003e8% Consumption taxe is included in this product pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Only 3 left in stock!\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003cbr\u003eOdyssey | RA3 | 1994-1999 | NA | F23A | I4\u003cbr\u003eOdyssey | RA4 | 1994-1999 | NA | F23A | I4\u003c!--split--\u003e"}
Cusco - Rear Strut brace Type OS - Honda Odyssey RA1/RA2/RA3/RA4 - 355 541 A

Cusco - Rear Strut brace Type OS - Honda Odyssey RA1/RA2/RA3/RA4

€299,60

Specifications:Manufacturer: Cusco JapanPart Number: 355 541 ABar Type: Strut brace Type OSPosition: RearPoints: 2 PointsMaterial: AluminiumCusco Strut Tower Bars Type OS, Oval Shaft designCenter Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balan...


More Info
24% OFF
Cusco Japan - Cusco Japan - Adjustable Toe Control Rod - Honda - RA1/RA2 - 355 474 E - Rzcrewgarage
{"id":8360302149907,"title":"Cusco Japan - Adjustable Toe Control Rod - Honda - Odyssey RA1\/RA2","handle":"cusco-japan-adjustable-toe-control-rod-honda-ra1-ra2-355-474-e","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Rear\u003cbr\u003eCamber Adjustment Range: \u003cbr\u003e\u003cbr\u003eThese stop the movement and flex that change the geometry on the front suspension under hard braking and cornering and drifting. They also help with stability and predictability when drifting or racing the car hard. They are packaged with all the necessary hardware to ensure ease of installation. If you have noticed the amateurs on the track trying to drift and wondered why they had so much body roll its because their suspension is not fully tuned. Every drifter here in Japan knows that the suspension should be fully tuned before even thinking of taking the car for serious drifting!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003c!--split--\u003e","published_at":"2023-05-23T11:03:51+08:00","created_at":"2023-05-23T11:03:54+08:00","vendor":"Cusco Japan","type":"Camber Kits and Alignement","tags":["1994","1995","1996","1997","1998","1999","cusco-japan","honda","JP1","odyssey-ra1-1994-1997-na-f22b-i4","odyssey-ra2-1997-1999-na-f22b-i4","rear","toe-kit","ws125"],"price":32870,"price_min":32870,"price_max":32870,"available":true,"price_varies":false,"compare_at_price":43500,"compare_at_price_min":43500,"compare_at_price_max":43500,"compare_at_price_varies":false,"variants":[{"id":45211568734483,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"355 474 E","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Adjustable Toe Control Rod - Honda - Odyssey RA1\/RA2","public_title":null,"options":["Default Title"],"price":32870,"weight":5000,"compare_at_price":43500,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/355_20474_20E.jpg?v=1684811034"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/355_20474_20E.jpg?v=1684811034","options":["Title"],"media":[{"alt":"Cusco Japan - Cusco Japan - Adjustable Toe Control Rod - Honda - RA1\/RA2 - 355 474 E - Rzcrewgarage","id":34080897794323,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/355_20474_20E.jpg?v=1684811034"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/355_20474_20E.jpg?v=1684811034","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePosition: Rear\u003cbr\u003eCamber Adjustment Range: \u003cbr\u003e\u003cbr\u003eThese stop the movement and flex that change the geometry on the front suspension under hard braking and cornering and drifting. They also help with stability and predictability when drifting or racing the car hard. They are packaged with all the necessary hardware to ensure ease of installation. If you have noticed the amateurs on the track trying to drift and wondered why they had so much body roll its because their suspension is not fully tuned. Every drifter here in Japan knows that the suspension should be fully tuned before even thinking of taking the car for serious drifting!\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eOdyssey | RA2 | 1997-1999 | NA | F22B | I4\u003c!--split--\u003e"}
Cusco Japan - Cusco Japan - Adjustable Toe Control Rod - Honda - RA1/RA2 - 355 474 E - Rzcrewgarage

Cusco Japan - Adjustable Toe Control Rod - Honda - Odyssey RA1/RA2

€328,70

Specifications:Manufacturer: Cusco JapanPosition: RearCamber Adjustment Range: These stop the movement and flex that change the geometry on the front suspension under hard braking and cornering and drifting. They also help with stability and predictability when drifting or racing the car hard. They are packaged with all the necessary hardware to...


More Info
12% OFF
ECWRA1 - Rzcrewgarage
{"id":8190188585235,"title":"Endless Chibi6 Big Brake kit - Honda - Odyssey RA1\/RA2","handle":"endless-chibi6-big-brake-kit-honda-odyssey-ra1-ra2-ecwra1","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Endless\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: 324×30mm\u003cbr\u003eCalipers Type: ??6Wagon\u003cbr\u003eRotors Type: 2PCS\u003cbr\u003eRotor face: Curving Slit\u003cbr\u003eBrake Pad type: RCP093\u003cbr\u003eNew reference number:ECZWRA1\u003cbr\u003e\u003cbr\u003eEndless has made their name with these big brake kits. Manufactured in Japan, These kits come complete including Rotors, Calipers, Brake lines and pads. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4,Odyssey | RA2 | 1997-1999 | NA | F22B | I4\u003c!--split--\u003e","published_at":"2023-03-20T11:55:57+08:00","created_at":"2023-03-20T11:55:59+08:00","vendor":"Endless","type":"Brake Calipers and Kits","tags":["1994","1995","1996","1997","1998","1999","324×30mm","front","honda","JP1","odyssey-ra1-1994-1997-na-f22b-i4","odyssey-ra2-1997-1999-na-f22b-i4","ws110"],"price":445030,"price_min":445030,"price_max":445030,"available":true,"price_varies":false,"compare_at_price":507700,"compare_at_price_min":507700,"compare_at_price_max":507700,"compare_at_price_varies":false,"variants":[{"id":44653605617939,"title":"SSM","option1":"SSM","option2":null,"option3":null,"sku":"ECWRA1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Endless Chibi6 Big Brake kit - Honda - Odyssey RA1\/RA2 - SSM","public_title":"SSM","options":["SSM"],"price":445030,"weight":33000,"compare_at_price":507700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44653605650707,"title":"MX 72","option1":"MX 72","option2":null,"option3":null,"sku":"ECWRA1-MX 72","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Endless Chibi6 Big Brake kit - Honda - Odyssey RA1\/RA2 - MX 72","public_title":"MX 72","options":["MX 72"],"price":445030,"weight":33000,"compare_at_price":507700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44653605683475,"title":"CC-RG","option1":"CC-RG","option2":null,"option3":null,"sku":"ECWRA1-CC-RG","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Endless Chibi6 Big Brake kit - Honda - Odyssey RA1\/RA2 - CC-RG","public_title":"CC-RG","options":["CC-RG"],"price":445030,"weight":33000,"compare_at_price":507700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44653605716243,"title":"Type R","option1":"Type R","option2":null,"option3":null,"sku":"ECWRA1-Type R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Endless Chibi6 Big Brake kit - Honda - Odyssey RA1\/RA2 - Type R","public_title":"Type R","options":["Type R"],"price":445030,"weight":33000,"compare_at_price":507700,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/chibi6_main_12c27689-b6be-44de-9d31-894f29bb46e5.jpg?v=1684745685","\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Racing_c_main_fab3f6fc-629b-4c16-91fc-2b45544f563f.jpg?v=1684745685"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/chibi6_main_12c27689-b6be-44de-9d31-894f29bb46e5.jpg?v=1684745685","options":["Brake Pads Type"],"media":[{"alt":"ECWRA1 - Rzcrewgarage","id":34071448682771,"position":1,"preview_image":{"aspect_ratio":1.5,"height":400,"width":600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/chibi6_main_12c27689-b6be-44de-9d31-894f29bb46e5.jpg?v=1684745685"},"aspect_ratio":1.5,"height":400,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/chibi6_main_12c27689-b6be-44de-9d31-894f29bb46e5.jpg?v=1684745685","width":600},{"alt":null,"id":34071448715539,"position":2,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Racing_c_main_fab3f6fc-629b-4c16-91fc-2b45544f563f.jpg?v=1684745685"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Racing_c_main_fab3f6fc-629b-4c16-91fc-2b45544f563f.jpg?v=1684745685","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Endless\u003cbr\u003ePosition: Front\u003cbr\u003eRotors Diameter: 324×30mm\u003cbr\u003eCalipers Type: ??6Wagon\u003cbr\u003eRotors Type: 2PCS\u003cbr\u003eRotor face: Curving Slit\u003cbr\u003eBrake Pad type: RCP093\u003cbr\u003eNew reference number:ECZWRA1\u003cbr\u003e\u003cbr\u003eEndless has made their name with these big brake kits. Manufactured in Japan, These kits come complete including Rotors, Calipers, Brake lines and pads. \u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSingapore and Malaysia: \u003c\/strong\u003eAll import taxes are included in our pricing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEuropean Tva, Iva: \u003c\/strong\u003eTaxes will be calculated during checkout at our company import rate. No additional charges will be added by your local authority.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSA:\u003c\/strong\u003e If this product is shipped from our US warehouse then taxes are included. Otherwise, please refer to the rest of the world paragragh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRest of the World:\u003c\/strong\u003e Other countries may have to pay their local import tax depending on your country's regulations.\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to any global location. Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4,Odyssey | RA2 | 1997-1999 | NA | F22B | I4\u003c!--split--\u003e"}
ECWRA1 - Rzcrewgarage

Endless Chibi6 Big Brake kit - Honda - Odyssey RA1/RA2

€4.450,30

Specifications:Manufacturer: EndlessPosition: FrontRotors Diameter: 324×30mmCalipers Type: ??6WagonRotors Type: 2PCSRotor face: Curving SlitBrake Pad type: RCP093New reference number:ECZWRA1Endless has made their name with these big brake kits. Manufactured in Japan, These kits come complete including Rotors, Calipers, Brake lines and pads. Taxe...


More Info
{"id":2206041473135,"title":"Spoon Rigid Collar Kit - Front - Honda Odyssey RA1\/RA3\/RA5","handle":"spoon-rigid-collar-kit-front-honda-odyssey-ra1-ra3-ra5-50261-bb8-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-BB8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eOdyssey | RA3 | 1994-1999 | NA | F23A | I4\u003cbr\u003eOdyssey | RA5 | 1994-1999 | NA | J30A | V6\u003c!--split--\u003e","published_at":"2019-04-24T12:06:10+08:00","created_at":"2019-04-24T12:06:11+08:00","vendor":"Spoon","type":"Collar Kits","tags":["1994","1995","1996","1997","1998","1999","collar-kits","front","honda","odyssey-ra1-1994-1997-na-f22b-i4","odyssey-ra3-1994-1999-na-f23a-i4","odyssey-ra5-1994-1999-na-j30a-v6","RA1\/RA3\/RA5","rigid-collars","spoon","spoon18.8108236846911","tva"],"price":26640,"price_min":26640,"price_max":26640,"available":true,"price_varies":false,"compare_at_price":26640,"compare_at_price_min":26640,"compare_at_price_max":26640,"compare_at_price_varies":false,"variants":[{"id":20638468571247,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"50261-BB8-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spoon Rigid Collar Kit - Front - Honda Odyssey RA1\/RA3\/RA5","public_title":null,"options":["Default Title"],"price":26640,"weight":2100,"compare_at_price":26640,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f574a549-8809-4d7a-90f2-e6c10be33073.jpg?v=1571709660"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f574a549-8809-4d7a-90f2-e6c10be33073.jpg?v=1571709660","options":["Title"],"media":[{"alt":"Spoon Rigid Collar Kit - Front - Honda Odyssey RA1\/RA3\/RA5 - 50261-BB8-000 - RZCrewEurope","id":1967725150319,"position":1,"preview_image":{"aspect_ratio":1.5,"height":256,"width":384,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f574a549-8809-4d7a-90f2-e6c10be33073.jpg?v=1571709660"},"aspect_ratio":1.5,"height":256,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/SPOONRC_f574a549-8809-4d7a-90f2-e6c10be33073.jpg?v=1571709660","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Spoon\u003cbr\u003ePart Number: 50261-BB8-000\u003cbr\u003ePosition: Front\u003cbr\u003eNumber of Collars: \u003cbr\u003e\u003cbr\u003eRIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.\u003cbr\u003e\u003cbr\u003eThe basic principle is one of chassis strengthening and rigidity without going overboard and compromising the cars inherent handling characteristics.\u003cbr\u003eThe Rigid Collar kit is simple to fit and low cost, Rigid Collars ease into position without affecting the basic geometry of the body.\u003cbr\u003eThe way the Rigid Collar works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. \u003cbr\u003eWhen the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins.\u003cbr\u003eThis is why an older vehicle fitted with new bushes, Shocks and springs, still doesn't behave like a new car.\u003cbr\u003eThe Rigid Collar is an aluminium washer (as per photo) with a square outside Taper to increase adhesion on the Thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and Bolt Hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and stopping movement forever.\u003cbr\u003e\u003cbr\u003eRigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eOdyssey | RA1 | 1994-1997 | NA | F22B | I4\u003cbr\u003eOdyssey | RA3 | 1994-1999 | NA | F23A | I4\u003cbr\u003eOdyssey | RA5 | 1994-1999 | NA | J30A | V6\u003c!--split--\u003e"}
Spoon Rigid Collar Kit - Front - Honda Odyssey RA1/RA3/RA5 - 50261-BB8-000 - RZCrewEurope

Spoon Rigid Collar Kit - Front - Honda Odyssey RA1/RA3/RA5

€266,40

Specifications:Manufacturer: SpoonPart Number: 50261-BB8-000Position: FrontNumber of Collars: RIGID COLLAR are simple in their shape, clever in their design, the material from which they are made is confidential and their performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan, we expect nothing less.The basic principle is one o...


More Info