{"id":7007614173295,"title":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Silvia S14 (1993-1998)","handle":"hks-coilover-suspension-full-kit-hipermax-s-nissan-silvia-s14-1993-1998-80300-an002","description":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eS15\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 59(6)\u003cbr\u003e- Rear: 49(5)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 220 (barrel)\u003cbr\u003e- Rear: 250\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 500\/412\u003cbr\u003e- Rear: 365\/284\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: Yes\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -73\u003cbr\u003e-- Rear: -12 ～ -85\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -73\u003cbr\u003e-- Rear: -12 ～ -85\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Silvia - S14 (1993-1996) SR20DE\u003cbr\u003eNissan - Silvia - S14 (1996-1998) SR20DE\u003cbr\u003eNissan - Silvia - S14 (1993-1996) SR20DET\u003cbr\u003eNissan - Silvia - S14 (1996-1998) SR20DET\u003c!--split--\u003e","published_at":"2022-06-08T14:39:20+08:00","created_at":"2022-06-08T14:39:21+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1993","1994","1995","1996","1997","1998","coilovers-and-springs","dampening-and-height-adjustable","hks","nissan","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4","tva"],"price":256920,"price_min":256920,"price_max":256920,"available":true,"price_varies":false,"compare_at_price":298680,"compare_at_price_min":298680,"compare_at_price_max":298680,"compare_at_price_varies":false,"variants":[{"id":40856876056687,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80300-AN002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Silvia S14 (1993-1998)","public_title":null,"options":["Default Title"],"price":256920,"weight":30000,"compare_at_price":298680,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_732b3d85-4437-4bdf-b026-5b7a2436e5d4.jpg?v=1654670361"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_732b3d85-4437-4bdf-b026-5b7a2436e5d4.jpg?v=1654670361","options":["Title"],"media":[{"alt":"HKS - Coilover Suspension Full Kit Hipermax S - Nissan Silvia S14 (1993-1998) - 80300-AN002 - Rzcrewgarage","id":23495755661423,"position":1,"preview_image":{"aspect_ratio":1.21,"height":496,"width":600,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_732b3d85-4437-4bdf-b026-5b7a2436e5d4.jpg?v=1654670361"},"aspect_ratio":1.21,"height":496,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_Hipermax_S_732b3d85-4437-4bdf-b026-5b7a2436e5d4.jpg?v=1654670361","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"SPECIFICATIONS:\u003cbr\u003eManufacturer: HKS\u003cbr\u003eAdjustability: Dampening and Height Adjustable\u003cbr\u003e\u003cbr\u003eSPECIFICATIONS:\u003cbr\u003eS15\u003cbr\u003eSeries: Hipermax S\u003cbr\u003eSpring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: 59(6)\u003cbr\u003e- Rear: 49(5)\u003cbr\u003eFree Height (mm):\u003cbr\u003e- Front: 220 (barrel)\u003cbr\u003e- Rear: 250\u003cbr\u003eRecommended Range to change Spring Rate N\/mm (kgf\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: N\/A\u003cbr\u003eDamper Force (Rebound\/Damping):\u003cbr\u003e- Front: 500\/412\u003cbr\u003e- Rear: 365\/284\u003cbr\u003e- Note: Damping force is at piston speed 0.1m\/sec.\u003cbr\u003eDefault position of Dial:\u003cbr\u003e- Front: 15\u003cbr\u003e- Rear: 15\u003cbr\u003eDamping Force Adjustment:\u003cbr\u003e- Front: 30 Steps\u003cbr\u003e- Rear: 30 Steps\u003cbr\u003eHeight Adjustable Lower Bracket:\u003cbr\u003e- Front: Yes\u003cbr\u003e- Rear: Yes\u003cbr\u003eUpper Mount:\u003cbr\u003e- Front: Rubber Bush\u003cbr\u003e- Rear: Rubber Bush\u003cbr\u003eDamper Layout:\u003cbr\u003e- Front: Inverted\u003cbr\u003e- Rear: Normal\u003cbr\u003eDamper\/Spring Layout:\u003cbr\u003e- Front: Coilover\u003cbr\u003e- Rear: Coilover\u003cbr\u003eDamping force adjustable with Wire:\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: Yes\u003cbr\u003eHelper Spring (Spring Rate N\/mm):\u003cbr\u003e- Front: N\/A\u003cbr\u003e- Rear: 19.8\u003cbr\u003eRide Height Specification -\u003cbr\u003e-Maximum Adjustable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -73\u003cbr\u003e-- Rear: -12 ～ -85\u003cbr\u003e-Drivable Range High - Low (mm):\u003cbr\u003e-- Front: ～ -73\u003cbr\u003e-- Rear: -12 ～ -85\u003cbr\u003eThis set of suspension is designed to replace the factory suspension related shock absorber \/ dampers and springs. Building upon the 3 decades of suspension development and 9 years since the last version of Hipermax IV GT release this series has unified the many different street based Hipermax merits and further improved this new flagship series for the ultimate combination of driving performance and comfort performance, Driving Comfort. With exception of the circuit specific HIpermax IV SP series all other series will be replaced with this all-mighty spec. Specifically developed to provide the ultimate in harmony between performance handling and control with supreme ride comfort yet capable of high level performance on circuit as well. With massive adjustability in ride height and damper settings these items are an excellent choice for the daily driver to look and perform best under any kind of circumstance.\u003cbr\u003e\u003cbr\u003eDISCLAIMER:\u003cbr\u003eProduct picture is generic. Actual shape may differ.\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part fits:\u003cbr\u003e\u003cbr\u003eNissan - Silvia - S14 (1993-1996) SR20DE\u003cbr\u003eNissan - Silvia - S14 (1996-1998) SR20DE\u003cbr\u003eNissan - Silvia - S14 (1993-1996) SR20DET\u003cbr\u003eNissan - Silvia - S14 (1996-1998) SR20DET\u003c!--split--\u003e"}

{"id":6950674825327,"title":"Cusco Japan Type Mz - 2 way (1.5 \u0026 2way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-mz-2-way-1-5-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-135-k2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 K2\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:34:16+08:00","created_at":"2022-02-15T18:34:17+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1993","1994","1995","1996","1997","1998","2-way","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":110400,"price_min":110400,"price_max":110400,"available":true,"price_varies":false,"compare_at_price":120000,"compare_at_price_min":120000,"compare_at_price_max":120000,"compare_at_price_varies":false,"variants":[{"id":40746302505071,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 135 K2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 2 way (1.5 \u0026 2way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":110400,"weight":11000,"compare_at_price":120000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_537bf072-a0b8-4921-b6ea-daeab536ee2a.jpg?v=1660709804"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_537bf072-a0b8-4921-b6ea-daeab536ee2a.jpg?v=1660709804","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 2 way (1.5 \u0026 2way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 135 K2","id":23781628706927,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_537bf072-a0b8-4921-b6ea-daeab536ee2a.jpg?v=1660709804"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_537bf072-a0b8-4921-b6ea-daeab536ee2a.jpg?v=1660709804","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 K2\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950674759791,"title":"Cusco Japan Type Mz - 2 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-mz-2-way-1-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-135-e2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 E2\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:34:12+08:00","created_at":"2022-02-15T18:34:13+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1993","1994","1995","1996","1997","1998","2-way","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":110400,"price_min":110400,"price_max":110400,"available":true,"price_varies":false,"compare_at_price":120000,"compare_at_price_min":120000,"compare_at_price_max":120000,"compare_at_price_varies":false,"variants":[{"id":40746302439535,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 135 E2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 2 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":110400,"weight":11000,"compare_at_price":120000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_d7438a72-7f64-4c13-b018-a29a1afd9e52.jpg?v=1660709800"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_d7438a72-7f64-4c13-b018-a29a1afd9e52.jpg?v=1660709800","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 2 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 135 E2","id":23781628444783,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_d7438a72-7f64-4c13-b018-a29a1afd9e52.jpg?v=1660709800"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_d7438a72-7f64-4c13-b018-a29a1afd9e52.jpg?v=1660709800","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 E2\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950674792559,"title":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-mz-1-5-way-1-5-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-135-k15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 K15\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:34:14+08:00","created_at":"2022-02-15T18:34:15+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1993","1994","1995","1996","1997","1998","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":92000,"price_min":92000,"price_max":92000,"available":false,"price_varies":false,"compare_at_price":100000,"compare_at_price_min":100000,"compare_at_price_max":100000,"compare_at_price_varies":false,"variants":[{"id":40746302472303,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 135 K15","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":92000,"weight":11000,"compare_at_price":100000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_f47a0580-1ed9-48a8-ac40-dba5bcc6d057.jpg?v=1660709802"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_f47a0580-1ed9-48a8-ac40-dba5bcc6d057.jpg?v=1660709802","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 135 K15","id":23781628674159,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_f47a0580-1ed9-48a8-ac40-dba5bcc6d057.jpg?v=1660709802"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_f47a0580-1ed9-48a8-ac40-dba5bcc6d057.jpg?v=1660709802","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 K15\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950674268271,"title":"Cusco Japan Type Mz - 2 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-mz-2-way-1-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-162-e2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 E2\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:33:46+08:00","created_at":"2022-02-15T18:33:47+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1993","1994","1995","1996","1997","1998","2-way","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":140520,"price_min":140520,"price_max":140520,"available":true,"price_varies":false,"compare_at_price":152760,"compare_at_price_min":152760,"compare_at_price_max":152760,"compare_at_price_varies":false,"variants":[{"id":40746301816943,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 162 E2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 2 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":140520,"weight":11000,"compare_at_price":152760,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_bf2b2801-8356-422c-b363-3b226e0e0e3c.jpg?v=1660709778"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_bf2b2801-8356-422c-b363-3b226e0e0e3c.jpg?v=1660709778","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 2 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 162 E2","id":23781628051567,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_bf2b2801-8356-422c-b363-3b226e0e0e3c.jpg?v=1660709778"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_bf2b2801-8356-422c-b363-3b226e0e0e3c.jpg?v=1660709778","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 E2\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950674235503,"title":"Cusco Japan Type Mz - 1 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-mz-1-way-1-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-162-e","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 E\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:33:44+08:00","created_at":"2022-02-15T18:33:45+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","1993","1994","1995","1996","1997","1998","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":140520,"price_min":140520,"price_max":140520,"available":true,"price_varies":false,"compare_at_price":152760,"compare_at_price_min":152760,"compare_at_price_max":152760,"compare_at_price_varies":false,"variants":[{"id":40746301784175,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 162 E","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 1 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":140520,"weight":11000,"compare_at_price":152760,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_44eb3270-55fe-4a76-99c0-ce0b721b11e3.jpg?v=1660709776"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_44eb3270-55fe-4a76-99c0-ce0b721b11e3.jpg?v=1660709776","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 1 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 162 E","id":23781628018799,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_44eb3270-55fe-4a76-99c0-ce0b721b11e3.jpg?v=1660709776"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_44eb3270-55fe-4a76-99c0-ce0b721b11e3.jpg?v=1660709776","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 E\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950674694255,"title":"Cusco Japan Type Mz - 1 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-mz-1-way-1-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-135-e","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 E\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:34:11+08:00","created_at":"2022-02-15T18:34:11+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","1993","1994","1995","1996","1997","1998","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":110400,"price_min":110400,"price_max":110400,"available":true,"price_varies":false,"compare_at_price":120000,"compare_at_price_min":120000,"compare_at_price_max":120000,"compare_at_price_varies":false,"variants":[{"id":40746302406767,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 135 E","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 1 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":110400,"weight":11000,"compare_at_price":120000,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_524c624e-40bd-4259-ba4d-d3b16b25c4e4.jpg?v=1660709798"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_524c624e-40bd-4259-ba4d-d3b16b25c4e4.jpg?v=1660709798","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 1 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 135 E","id":23781628412015,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_524c624e-40bd-4259-ba4d-d3b16b25c4e4.jpg?v=1660709798"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_524c624e-40bd-4259-ba4d-d3b16b25c4e4.jpg?v=1660709798","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 E\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950673940591,"title":"Cusco Japan Type Rs - 1 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-rs-1-way-1-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-135-f","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 F\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:33:32+08:00","created_at":"2022-02-15T18:33:33+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","1993","1994","1995","1996","1997","1998","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":110280,"price_min":110280,"price_max":110280,"available":true,"price_varies":false,"compare_at_price":119880,"compare_at_price_min":119880,"compare_at_price_max":119880,"compare_at_price_varies":false,"variants":[{"id":40746301390959,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 135 F","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs - 1 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":110280,"weight":10000,"compare_at_price":119880,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_925a5c0f-f576-42b2-b059-6d1b93f8709e.jpg?v=1660709755"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_925a5c0f-f576-42b2-b059-6d1b93f8709e.jpg?v=1660709755","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs - 1 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 135 F","id":23781627625583,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_925a5c0f-f576-42b2-b059-6d1b93f8709e.jpg?v=1660709755"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_925a5c0f-f576-42b2-b059-6d1b93f8709e.jpg?v=1660709755","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 F\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950674333807,"title":"Cusco Japan Type Mz - 2 way (1.5 \u0026 2way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-mz-2-way-1-5-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-162-k2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 K2\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:33:49+08:00","created_at":"2022-02-15T18:33:50+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1993","1994","1995","1996","1997","1998","2-way","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":140520,"price_min":140520,"price_max":140520,"available":true,"price_varies":false,"compare_at_price":152760,"compare_at_price_min":152760,"compare_at_price_max":152760,"compare_at_price_varies":false,"variants":[{"id":40746301915247,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 162 K2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 2 way (1.5 \u0026 2way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":140520,"weight":11000,"compare_at_price":152760,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_70ad7156-bec6-4690-b881-ec004fd41379.jpg?v=1660709782"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_70ad7156-bec6-4690-b881-ec004fd41379.jpg?v=1660709782","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 2 way (1.5 \u0026 2way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 162 K2","id":23781628117103,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_70ad7156-bec6-4690-b881-ec004fd41379.jpg?v=1660709782"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_70ad7156-bec6-4690-b881-ec004fd41379.jpg?v=1660709782","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 K2\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950674301039,"title":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-mz-1-5-way-1-5-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-162-k15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 K15\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:33:47+08:00","created_at":"2022-02-15T18:33:48+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1993","1994","1995","1996","1997","1998","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":140520,"price_min":140520,"price_max":140520,"available":true,"price_varies":false,"compare_at_price":152760,"compare_at_price_min":152760,"compare_at_price_max":152760,"compare_at_price_varies":false,"variants":[{"id":40746301849711,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 162 K15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":140520,"weight":11000,"compare_at_price":152760,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_b0b4be5b-ff2f-46fe-8af5-2dfb69432278.jpg?v=1660709780"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_b0b4be5b-ff2f-46fe-8af5-2dfb69432278.jpg?v=1660709780","options":["Title"],"media":[{"alt":"Cusco Japan Type Mz - 1.5 way (1.5\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 162 K15","id":23781628084335,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_b0b4be5b-ff2f-46fe-8af5-2dfb69432278.jpg?v=1660709780"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_Type_MZ_b0b4be5b-ff2f-46fe-8af5-2dfb69432278.jpg?v=1660709780","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 K15\u003cbr\u003eLSD Model: Type Mz\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type MZ is perfect for a mid to high power vehicules. With its 24 plates within its assembly, this LSD ensure a better torque and power distribution during hard cornering. Its Lower response is of great benefit to your drivetrain durability and perfect to keep perfect control in sharp cornering and\/or drifting.\u003cbr\u003eType MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.\u003cbr\u003eThe Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950674071663,"title":"Cusco Japan Type Rs - 2 way (1.5 \u0026 2way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-rs-2-way-1-5-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-135-l2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 L2\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:33:36+08:00","created_at":"2022-02-15T18:33:37+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1993","1994","1995","1996","1997","1998","2-way","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":110280,"price_min":110280,"price_max":110280,"available":true,"price_varies":false,"compare_at_price":119880,"compare_at_price_min":119880,"compare_at_price_max":119880,"compare_at_price_varies":false,"variants":[{"id":40746301554799,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 135 L2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs - 2 way (1.5 \u0026 2way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":110280,"weight":10000,"compare_at_price":119880,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_c317a3a2-09a9-4f99-b488-94024648af27.jpg?v=1660709762"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_c317a3a2-09a9-4f99-b488-94024648af27.jpg?v=1660709762","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs - 2 way (1.5 \u0026 2way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 135 L2","id":23781627822191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_c317a3a2-09a9-4f99-b488-94024648af27.jpg?v=1660709762"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_c317a3a2-09a9-4f99-b488-94024648af27.jpg?v=1660709762","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 L2\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950673514607,"title":"Cusco Japan Type Rs - 2 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-rs-2-way-1-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-162-f2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 F2\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:33:06+08:00","created_at":"2022-02-15T18:33:07+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1993","1994","1995","1996","1997","1998","2-way","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":138600,"price_min":138600,"price_max":138600,"available":true,"price_varies":false,"compare_at_price":150600,"compare_at_price_min":150600,"compare_at_price_max":150600,"compare_at_price_varies":false,"variants":[{"id":40746300899439,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 162 F2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs - 2 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":138600,"weight":10000,"compare_at_price":150600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_950c3634-474a-429a-a804-a360de9d6135.jpg?v=1660709735"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_950c3634-474a-429a-a804-a360de9d6135.jpg?v=1660709735","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs - 2 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 162 F2","id":23781626937455,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_950c3634-474a-429a-a804-a360de9d6135.jpg?v=1660709735"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_950c3634-474a-429a-a804-a360de9d6135.jpg?v=1660709735","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 F2\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950674038895,"title":"Cusco Japan Type Rs - 1.5 way (1.5\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-rs-1-5-way-1-5-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-135-l15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 L15\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:33:35+08:00","created_at":"2022-02-15T18:33:36+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1993","1994","1995","1996","1997","1998","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":91900,"price_min":91900,"price_max":91900,"available":false,"price_varies":false,"compare_at_price":99900,"compare_at_price_min":99900,"compare_at_price_max":99900,"compare_at_price_varies":false,"variants":[{"id":40746301522031,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 135 L15","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Cusco Japan Type Rs - 1.5 way (1.5\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":91900,"weight":10000,"compare_at_price":99900,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_6d4f2b9c-3728-4fb2-8309-1236f659c16f.jpg?v=1660709760"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_6d4f2b9c-3728-4fb2-8309-1236f659c16f.jpg?v=1660709760","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs - 1.5 way (1.5\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 135 L15","id":23781627756655,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_6d4f2b9c-3728-4fb2-8309-1236f659c16f.jpg?v=1660709760"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_6d4f2b9c-3728-4fb2-8309-1236f659c16f.jpg?v=1660709760","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 L15\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e0\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!0\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950674006127,"title":"Cusco Japan Type Rs - 2 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-rs-2-way-1-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-135-f2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 F2\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:33:33+08:00","created_at":"2022-02-15T18:33:34+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1993","1994","1995","1996","1997","1998","2-way","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":110280,"price_min":110280,"price_max":110280,"available":true,"price_varies":false,"compare_at_price":119880,"compare_at_price_min":119880,"compare_at_price_max":119880,"compare_at_price_varies":false,"variants":[{"id":40746301489263,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 135 F2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs - 2 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":110280,"weight":10000,"compare_at_price":119880,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_42b7e2a8-7b8d-4768-869d-91d744da2de3.jpg?v=1660709758"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_42b7e2a8-7b8d-4768-869d-91d744da2de3.jpg?v=1660709758","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs - 2 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 135 F2","id":23781627691119,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_42b7e2a8-7b8d-4768-869d-91d744da2de3.jpg?v=1660709758"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_42b7e2a8-7b8d-4768-869d-91d744da2de3.jpg?v=1660709758","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 135 F2\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 2 way (1\u0026amp;2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950673580143,"title":"Cusco Japan Type Rs - 2 way (1.5 \u0026 2way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-rs-2-way-1-5-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-162-l2","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 L2\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:33:10+08:00","created_at":"2022-02-15T18:33:10+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1993","1994","1995","1996","1997","1998","2-way","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":138600,"price_min":138600,"price_max":138600,"available":true,"price_varies":false,"compare_at_price":150600,"compare_at_price_min":150600,"compare_at_price_max":150600,"compare_at_price_varies":false,"variants":[{"id":40746300964975,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 162 L2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs - 2 way (1.5 \u0026 2way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":138600,"weight":10000,"compare_at_price":150600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_f82e34e7-ef96-4f26-b0a1-293bb7542cac.jpg?v=1660709739"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_f82e34e7-ef96-4f26-b0a1-293bb7542cac.jpg?v=1660709739","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs - 2 way (1.5 \u0026 2way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 162 L2","id":23781627002991,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_f82e34e7-ef96-4f26-b0a1-293bb7542cac.jpg?v=1660709739"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_f82e34e7-ef96-4f26-b0a1-293bb7542cac.jpg?v=1660709739","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 L2\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 2 way (1.5 \u0026amp; 2way)\u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950673547375,"title":"Cusco Japan Type Rs - 1.5 way (1.5\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-rs-1-5-way-1-5-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-162-l15","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 L15\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:33:08+08:00","created_at":"2022-02-15T18:33:08+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-5-way","1993","1994","1995","1996","1997","1998","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":138600,"price_min":138600,"price_max":138600,"available":true,"price_varies":false,"compare_at_price":150600,"compare_at_price_min":150600,"compare_at_price_max":150600,"compare_at_price_varies":false,"variants":[{"id":40746300932207,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 162 L15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs - 1.5 way (1.5\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":138600,"weight":10000,"compare_at_price":150600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_90ed8382-f714-4e0a-9714-84b96078a65d.jpg?v=1660709737"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_90ed8382-f714-4e0a-9714-84b96078a65d.jpg?v=1660709737","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs - 1.5 way (1.5\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 162 L15","id":23781626970223,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_90ed8382-f714-4e0a-9714-84b96078a65d.jpg?v=1660709737"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_90ed8382-f714-4e0a-9714-84b96078a65d.jpg?v=1660709737","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 L15\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1.5 way (1.5\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6950673481839,"title":"Cusco Japan Type Rs - 1 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","handle":"cusco-japan-type-rs-1-way-1-2way-rear-lsd-nissan-silvia-s14-mt-at-s14na-lsd-162-f","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 F\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e","published_at":"2022-02-15T18:33:04+08:00","created_at":"2022-02-15T18:33:05+08:00","vendor":"Cusco Japan","type":"Limited Slip Diffs","tags":["1-way","1993","1994","1995","1996","1997","1998","at","cusco-japan","limited-slip-diffs","mt","nissan","rear","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","tva","ws123"],"price":138600,"price_min":138600,"price_max":138600,"available":true,"price_varies":false,"compare_at_price":150600,"compare_at_price_min":150600,"compare_at_price_max":150600,"compare_at_price_varies":false,"variants":[{"id":40746300866671,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LSD 162 F","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan Type Rs - 1 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT)","public_title":null,"options":["Default Title"],"price":138600,"weight":10000,"compare_at_price":150600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_d3a8658d-523e-4b27-a04f-ec762d3e86b8.jpg?v=1660709734"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_d3a8658d-523e-4b27-a04f-ec762d3e86b8.jpg?v=1660709734","options":["Title"],"media":[{"alt":"Cusco Japan Type Rs - 1 way (1\u00262way) Rear LSD - Nissan Silvia - S14 (MT,AT) - S14NA - LSD 162 F","id":23781626904687,"position":1,"preview_image":{"aspect_ratio":1.0,"height":450,"width":450,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_d3a8658d-523e-4b27-a04f-ec762d3e86b8.jpg?v=1660709734"},"aspect_ratio":1.0,"height":450,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco_LSD_type_RS_d3a8658d-523e-4b27-a04f-ec762d3e86b8.jpg?v=1660709734","width":450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: LSD 162 F\u003cbr\u003eLSD Model: Type Rs\u003cbr\u003eLSD Type: 1 way (1\u0026amp;2way) \u003cbr\u003eTransmission Type: MT,AT\u003cbr\u003ePosition: Rear\u003cbr\u003e\u003cstrong\u003eIMPORTANT: Read the fitting tab to ensure this part fits on your car!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe type RS LSD is perfect for low to mid power vehicule. With a lower amount of plates in its assembly, this lsd is highly reactive and ensure low resistance resulting in better clutch response, pedal feel, durability and low clungging noise.\u003cbr\u003e\u003cbr\u003eIn the RS Model, the activation pressure is applied to the same direction of the initial torque with the utilization of a coil spring. Therefore, the initial torque is set lower than the MZ model enables a smoother and quicker initial clutch plates engagement from a non operational to a fully functioning state even despite a low initial torque rating is set. The virtues of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides overall gentle and stable operation.\u003cbr\u003e\u003cbr\u003eThese RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.\u003cbr\u003e\u003cbr\u003ePressure ring features dual profiles to switch between (1 way \u0026amp; 1.5 way) (1 way \u0026amp; 2 way) (1.5 way \u0026amp; 2 way) without purchasing additional components!Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.\u003cbr\u003e\u003cbr\u003eAll Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combinaion of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eImport taxes and European Union (TVA \/ IVA \/ VAT) are included in our pricing excluding United Kingdom. Other countries such as Switzerland may have additional charges. For the rest of the countries, no other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse (Paris) and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c!--split--\u003e"}

{"id":6730839949423,"title":"Blitz - ZZ-R DSC Plus Coilover Kit - Nissan Silvia S14","handle":"blitz-zz-r-dsc-plus-coilovers-nissan-silvia-s14-98755","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 98755\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIncluded:\n- Coilover suspension and hardware\u003cbr\u003e\n- SpecDSC Plus controller, motors and hardware\u003cbr\u003e\nSeries: ZZ-R SpecDSC Plus\u003cbr\u003e\u003cbr\u003e\nMaterials:\u003cbr\u003e\n- Springs: Special high-tension Steel (SAE9245)\u003cbr\u003e\n- Cylinder Case: High-strength Steel (STKM13C)\u003cbr\u003e\u003cbr\u003e\n\n- S14 -\u003cbr\u003e\nUpper Mount Configuration:\u003cbr\u003e\n- Front: Adjustable Pillow Upper Mount\u003cbr\u003e\n- Rear: Reinforced Rubber Upper Mount\u003cbr\u003e\u003cbr\u003e\n\nSpring Spec.:\u003cbr\u003e\n- Spring Rate (kgf.mm):\u003cbr\u003e\n-- Front: 8.0\u003cbr\u003e\n-- Rear: 6.0\u003cbr\u003e\u003cbr\u003e\n\n- Free Length (mm):\u003cbr\u003e\n-- Front: 180\u003cbr\u003e\n-- Rear: 220\u003cbr\u003e\u003cbr\u003e\n\nHeight adjustment range:\u003cbr\u003e\n- Front: -70 ~ +20\u003cbr\u003e\n- Rear: -65 ~ +20\u003cbr\u003e\u003cbr\u003e\n\nDamper Adjustment Dial Extension:\u003cbr\u003e\n- 100mm\u003cbr\u003e\u003cbr\u003e\n\nFEATURES:\u003cbr\u003e\n- Single Cylinder Type\u003cbr\u003e\n- 96 stage adjustment method\u003cbr\u003e\n- Practical use for street circuit and wide range of events\u003cbr\u003e\n- Designed with large diameter piston at 44mm (some vehicles)\u003cbr\u003e\n- Forged aluminum upper mount\u003cbr\u003e\n- Forged aluminum sheet for reduced weight and increased durability and strength\u003cbr\u003e\n- Rigid bracket coated with special pain to achieve durability\u003cbr\u003e\n- Aluminum bracket coated in black anodized paint to improve corrosion resistance\u003cbr\u003e\n- Included height adjustment wrench\u003cbr\u003e\u003cbr\u003e The ZZ-R DSC coilover series are standard ZZ-R coilovers enhanced with a motorized system to adjust the dampening rates from inside the passenger cabin.\u003cbr\u003e\nThey are full length adjustable, featuring up to 96-steps dampening force adjustment managed by the motorized system.\u003cbr\u003e\nThe precision of dampening can be adjusted from the car controller between 32\/64\/96 steps\u003cbr\u003e\nThe dampening of the coilovers can be controlled left\/right, or each coilover individually, and up to 5 settings can be stored in the controller.\u003cbr\u003e\nThe controller has a \"Highway Mode\" which auto adjusts the dampening according to the speed.\u003cbr\u003e\nThey are developped to be street and track friendly and use aluminum upper mounts, lock seats and brackets for rigidity and weight savings.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R DSC are rebuildable coilovers.\u003c!--split--\u003e\u003cbr\u003e\u003cbr\u003eIncluded:\n- Coilover suspension and hardware\u003cbr\u003e\n- SpecDSC Plus controller, motors and hardware\u003cbr\u003e\nSeries: ZZ-R SpecDSC Plus\u003cbr\u003e\u003cbr\u003e\nMaterials:\u003cbr\u003e\n- Springs: Special high-tension Steel (SAE9245)\u003cbr\u003e\n- Cylinder Case: High-strength Steel (STKM13C)\u003cbr\u003e\u003cbr\u003e\n\n- S14 -\u003cbr\u003e\nUpper Mount Configuration:\u003cbr\u003e\n- Front: Adjustable Pillow Upper Mount\u003cbr\u003e\n- Rear: Reinforced Rubber Upper Mount\u003cbr\u003e\u003cbr\u003e\n\nSpring Spec.:\u003cbr\u003e\n- Spring Rate (kgf.mm):\u003cbr\u003e\n-- Front: 8.0\u003cbr\u003e\n-- Rear: 6.0\u003cbr\u003e\u003cbr\u003e\n\n- Free Length (mm):\u003cbr\u003e\n-- Front: 180\u003cbr\u003e\n-- Rear: 220\u003cbr\u003e\u003cbr\u003e\n\nHeight adjustment range:\u003cbr\u003e\n- Front: -70 ~ +20\u003cbr\u003e\n- Rear: -65 ~ +20\u003cbr\u003e\u003cbr\u003e\n\nDamper Adjustment Dial Extension:\u003cbr\u003e\n- 100mm\u003cbr\u003e\u003cbr\u003e\n\nFEATURES:\u003cbr\u003e\n- Single Cylinder Type\u003cbr\u003e\n- 96 stage adjustment method\u003cbr\u003e\n- Practical use for street circuit and wide range of events\u003cbr\u003e\n- Designed with large diameter piston at 44mm (some vehicles)\u003cbr\u003e\n- Forged aluminum upper mount\u003cbr\u003e\n- Forged aluminum sheet for reduced weight and increased durability and strength\u003cbr\u003e\n- Rigid bracket coated with special pain to achieve durability\u003cbr\u003e\n- Aluminum bracket coated in black anodized paint to improve corrosion resistance\u003cbr\u003e\n- Included height adjustment wrench\u003chr\u003e\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2021-08-12T17:27:33+08:00","created_at":"2021-08-12T17:27:35+08:00","vendor":"Blitz","type":"Coilovers and Springs","tags":["1993","1994","1995","1996","1997","1998","blitz","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","nissan","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4","ws142"],"price":215076,"price_min":215076,"price_max":215076,"available":true,"price_varies":false,"compare_at_price":329280,"compare_at_price_min":329280,"compare_at_price_max":329280,"compare_at_price_varies":false,"variants":[{"id":39870387814511,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"98755","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz - ZZ-R DSC Plus Coilover Kit - Nissan Silvia S14","public_title":null,"options":["Default Title"],"price":215076,"weight":32500,"compare_at_price":329280,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_Damper_ZZ-R_SpecDSC_Plus_Coilover_Suspension_30171ad5-672d-452d-a567-c559304bf278.jpg?v=1667727049"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_Damper_ZZ-R_SpecDSC_Plus_Coilover_Suspension_30171ad5-672d-452d-a567-c559304bf278.jpg?v=1667727049","options":["Title"],"media":[{"alt":"Blitz - ZZ-R DSC Plus Coilovers - Nissan Silvia S14 - 98755 - Rzcrewgarage","id":32125130244371,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1837,"width":2756,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_Damper_ZZ-R_SpecDSC_Plus_Coilover_Suspension_30171ad5-672d-452d-a567-c559304bf278.jpg?v=1667727049"},"aspect_ratio":1.5,"height":1837,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_Damper_ZZ-R_SpecDSC_Plus_Coilover_Suspension_30171ad5-672d-452d-a567-c559304bf278.jpg?v=1667727049","width":2756}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 98755\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIncluded:\n- Coilover suspension and hardware\u003cbr\u003e\n- SpecDSC Plus controller, motors and hardware\u003cbr\u003e\nSeries: ZZ-R SpecDSC Plus\u003cbr\u003e\u003cbr\u003e\nMaterials:\u003cbr\u003e\n- Springs: Special high-tension Steel (SAE9245)\u003cbr\u003e\n- Cylinder Case: High-strength Steel (STKM13C)\u003cbr\u003e\u003cbr\u003e\n\n- S14 -\u003cbr\u003e\nUpper Mount Configuration:\u003cbr\u003e\n- Front: Adjustable Pillow Upper Mount\u003cbr\u003e\n- Rear: Reinforced Rubber Upper Mount\u003cbr\u003e\u003cbr\u003e\n\nSpring Spec.:\u003cbr\u003e\n- Spring Rate (kgf.mm):\u003cbr\u003e\n-- Front: 8.0\u003cbr\u003e\n-- Rear: 6.0\u003cbr\u003e\u003cbr\u003e\n\n- Free Length (mm):\u003cbr\u003e\n-- Front: 180\u003cbr\u003e\n-- Rear: 220\u003cbr\u003e\u003cbr\u003e\n\nHeight adjustment range:\u003cbr\u003e\n- Front: -70 ~ +20\u003cbr\u003e\n- Rear: -65 ~ +20\u003cbr\u003e\u003cbr\u003e\n\nDamper Adjustment Dial Extension:\u003cbr\u003e\n- 100mm\u003cbr\u003e\u003cbr\u003e\n\nFEATURES:\u003cbr\u003e\n- Single Cylinder Type\u003cbr\u003e\n- 96 stage adjustment method\u003cbr\u003e\n- Practical use for street circuit and wide range of events\u003cbr\u003e\n- Designed with large diameter piston at 44mm (some vehicles)\u003cbr\u003e\n- Forged aluminum upper mount\u003cbr\u003e\n- Forged aluminum sheet for reduced weight and increased durability and strength\u003cbr\u003e\n- Rigid bracket coated with special pain to achieve durability\u003cbr\u003e\n- Aluminum bracket coated in black anodized paint to improve corrosion resistance\u003cbr\u003e\n- Included height adjustment wrench\u003cbr\u003e\u003cbr\u003e The ZZ-R DSC coilover series are standard ZZ-R coilovers enhanced with a motorized system to adjust the dampening rates from inside the passenger cabin.\u003cbr\u003e\nThey are full length adjustable, featuring up to 96-steps dampening force adjustment managed by the motorized system.\u003cbr\u003e\nThe precision of dampening can be adjusted from the car controller between 32\/64\/96 steps\u003cbr\u003e\nThe dampening of the coilovers can be controlled left\/right, or each coilover individually, and up to 5 settings can be stored in the controller.\u003cbr\u003e\nThe controller has a \"Highway Mode\" which auto adjusts the dampening according to the speed.\u003cbr\u003e\nThey are developped to be street and track friendly and use aluminum upper mounts, lock seats and brackets for rigidity and weight savings.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R DSC are rebuildable coilovers.\u003c!--split--\u003e\u003cbr\u003e\u003cbr\u003eIncluded:\n- Coilover suspension and hardware\u003cbr\u003e\n- SpecDSC Plus controller, motors and hardware\u003cbr\u003e\nSeries: ZZ-R SpecDSC Plus\u003cbr\u003e\u003cbr\u003e\nMaterials:\u003cbr\u003e\n- Springs: Special high-tension Steel (SAE9245)\u003cbr\u003e\n- Cylinder Case: High-strength Steel (STKM13C)\u003cbr\u003e\u003cbr\u003e\n\n- S14 -\u003cbr\u003e\nUpper Mount Configuration:\u003cbr\u003e\n- Front: Adjustable Pillow Upper Mount\u003cbr\u003e\n- Rear: Reinforced Rubber Upper Mount\u003cbr\u003e\u003cbr\u003e\n\nSpring Spec.:\u003cbr\u003e\n- Spring Rate (kgf.mm):\u003cbr\u003e\n-- Front: 8.0\u003cbr\u003e\n-- Rear: 6.0\u003cbr\u003e\u003cbr\u003e\n\n- Free Length (mm):\u003cbr\u003e\n-- Front: 180\u003cbr\u003e\n-- Rear: 220\u003cbr\u003e\u003cbr\u003e\n\nHeight adjustment range:\u003cbr\u003e\n- Front: -70 ~ +20\u003cbr\u003e\n- Rear: -65 ~ +20\u003cbr\u003e\u003cbr\u003e\n\nDamper Adjustment Dial Extension:\u003cbr\u003e\n- 100mm\u003cbr\u003e\u003cbr\u003e\n\nFEATURES:\u003cbr\u003e\n- Single Cylinder Type\u003cbr\u003e\n- 96 stage adjustment method\u003cbr\u003e\n- Practical use for street circuit and wide range of events\u003cbr\u003e\n- Designed with large diameter piston at 44mm (some vehicles)\u003cbr\u003e\n- Forged aluminum upper mount\u003cbr\u003e\n- Forged aluminum sheet for reduced weight and increased durability and strength\u003cbr\u003e\n- Rigid bracket coated with special pain to achieve durability\u003cbr\u003e\n- Aluminum bracket coated in black anodized paint to improve corrosion resistance\u003cbr\u003e\n- Included height adjustment wrench\u003chr\u003e\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125312819311,"title":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Silvia S14","handle":"hks-hipermax-iv-gt-coilovers-nissan-silvia-s14-80230-an002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -81\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 83.9Nm\u003cbr\u003eCompression Setting: 38.2Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -80\u003cbr\u003eSpring Rate: F=59(6)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.11Nm\u003cbr\u003eCompression Setting: 1.37Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on S15(SR20DET).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -81\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 83.9Nm\u003cbr\u003eCompression Setting: 38.2Nm\u003chr\u003eHeight data is based on S15(SR20DET).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -80\u003cbr\u003eSpring Rate: F=59(6)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.11Nm\u003cbr\u003eCompression Setting: 1.37Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:06:44+08:00","created_at":"2019-02-08T13:06:45+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1993","1994","1995","1996","1997","1998","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks30","nissan","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4"],"price":161500,"price_min":161500,"price_max":161500,"available":false,"price_varies":false,"compare_at_price":201900,"compare_at_price_min":201900,"compare_at_price_max":201900,"compare_at_price_varies":false,"variants":[{"id":20025495781487,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80230-AN002","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"HKS - HIPERMAX IV GT Coilover Kit - Nissan Silvia S14","public_title":null,"options":["Default Title"],"price":161500,"weight":26000,"compare_at_price":201900,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_5057bb59-2cc2-4240-99b5-64ad0f861d0f.jpg?v=1571709620"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_5057bb59-2cc2-4240-99b5-64ad0f861d0f.jpg?v=1571709620","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV GT Coilovers - Nissan Silvia S14 - 80230-AN002 - RZCrewGarage","id":1850808926319,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_5057bb59-2cc2-4240-99b5-64ad0f861d0f.jpg?v=1571709620"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_GT4.JPG_5057bb59-2cc2-4240-99b5-64ad0f861d0f.jpg?v=1571709620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80230-AN002\u003cbr\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -81\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 83.9Nm\u003cbr\u003eCompression Setting: 38.2Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -80\u003cbr\u003eSpring Rate: F=59(6)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.11Nm\u003cbr\u003eCompression Setting: 1.37Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on S15(SR20DET).The HKS HIPERMAX Series MAX IV GT is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV GT\u003cbr\u003eRef: 80230-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -47mm (Max Adjustment: 0 ~ -81\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eRebound Setting: 83.9Nm\u003cbr\u003eCompression Setting: 38.2Nm\u003chr\u003eHeight data is based on S15(SR20DET).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -45mm (Max Adjustment: 0 ~ -80\u003cbr\u003eSpring Rate: F=59(6)\/R=49(5)kg\u003cbr\u003eRebound Setting: 2.11Nm\u003cbr\u003eCompression Setting: 1.37Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":2125310361711,"title":"HKS - HIPERMAX IV SP Coilover Kit - Nissan Silvia S14","handle":"hks-hipermax-iv-sp-coilovers-nissan-silvia-s14-80250-an002","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80250-AN002\u003cbr\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -28mm (Max Adjustment: 0mm ~ -81mm\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 40Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -36mm (Max Adjustment: 0mm ~ -99mm\u003cbr\u003eSpring Rate: 5kg\u003cbr\u003eRebound Setting: 7Nm\u003cbr\u003eCompression Setting: 2.7Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on S15(SR20DET).The HKS HIPERMAX Series MAX IV SP is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -28mm (Max Adjustment: 0mm ~ -81mm\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 40Nm\u003chr\u003eHeight data is based on S15(SR20DET).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -36mm (Max Adjustment: 0mm ~ -99mm\u003cbr\u003eSpring Rate: 5kg\u003cbr\u003eRebound Setting: 7Nm\u003cbr\u003eCompression Setting: 2.7Nm\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2019-02-08T13:05:34+08:00","created_at":"2019-02-08T13:05:35+08:00","vendor":"HKS","type":"Coilovers and Springs","tags":["1993","1994","1995","1996","1997","1998","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","hks","hks22","nissan","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4"],"price":227160,"price_min":227160,"price_max":227160,"available":true,"price_varies":false,"compare_at_price":277080,"compare_at_price_min":277080,"compare_at_price_max":277080,"compare_at_price_varies":false,"variants":[{"id":20025493225583,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"80250-AN002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HKS - HIPERMAX IV SP Coilover Kit - Nissan Silvia S14","public_title":null,"options":["Default Title"],"price":227160,"weight":26000,"compare_at_price":277080,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_630029da-4d86-427a-8a5e-d89582df5ee5.jpg?v=1571709618"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_630029da-4d86-427a-8a5e-d89582df5ee5.jpg?v=1571709618","options":["Title"],"media":[{"alt":"HKS - HIPERMAX IV SP Coilovers - Nissan Silvia S14 - 80250-AN002 - RZCrewGarage","id":1850806468719,"position":1,"preview_image":{"aspect_ratio":1.5,"height":480,"width":720,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_630029da-4d86-427a-8a5e-d89582df5ee5.jpg?v=1571709618"},"aspect_ratio":1.5,"height":480,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/HKS_SP_IV.JPG_630029da-4d86-427a-8a5e-d89582df5ee5.jpg?v=1571709618","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: HKS\u003cbr\u003ePart Number: 80250-AN002\u003cbr\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -28mm (Max Adjustment: 0mm ~ -81mm\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 40Nm\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -36mm (Max Adjustment: 0mm ~ -99mm\u003cbr\u003eSpring Rate: 5kg\u003cbr\u003eRebound Setting: 7Nm\u003cbr\u003eCompression Setting: 2.7Nm\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRemarks: Height data is based on S15(SR20DET).The HKS HIPERMAX Series MAX IV SP is the ultimate sports suspension for street and track.\u003cbr\u003e\u003cbr\u003e\nSingle Tube Damper Design\u003cbr\u003e\nMono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.\u003cbr\u003e\nDust Boot\u003cbr\u003e\nProtect the shaft from the flying stones.\u003cbr\u003e\nPNE Coating\u003cbr\u003e\nUsing this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.\u003cbr\u003e\nM Shaft (?46 normal type)\u003cbr\u003e\nWith the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.\u003cbr\u003e\nAdopted Pillow Ball Upper Mount\u003cbr\u003e\nFor more accurate and sharp steering.\u003cbr\u003e\nNew Design Needle\u003cbr\u003e\nNewly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.\u003cbr\u003e\nReduction of Unsprung Weight\u003cbr\u003e\nIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)\u003cbr\u003e\n30 Step Damping Force Adjustment\u003cbr\u003e\n30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.\u003c!--split--\u003eType: MAX IV SP\u003cbr\u003eRef: 80250-AN002\u003cbr\u003e\u003cbr\u003eFront:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -28mm (Max Adjustment: 0mm ~ -81mm\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eRebound Setting: 125Nm\u003cbr\u003eCompression Setting: 40Nm\u003chr\u003eHeight data is based on S15(SR20DET).\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003eDampening Adjustment: 30 Steps\u003cbr\u003eLowering: -36mm (Max Adjustment: 0mm ~ -99mm\u003cbr\u003eSpring Rate: 5kg\u003cbr\u003eRebound Setting: 7Nm\u003cbr\u003eCompression Setting: 2.7Nm\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":1778138644591,"title":"Cusco Japan - Sport S Coilover Kit - Nissan Silvia S14","handle":"cusco-japan-sport-s-coilover-kit-nissan-silvia-s14-222-64s-cn","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 222 64S CN\u003cbr\u003eType: Sport S Ref 222 64S CN\u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -70 to -20 ? -65 to 0\u003cbr\u003eMaximum adjustment F\/R: - ? -\u003cbr\u003eSpring Rates (Kg): 7 or (6\/8\/9\/10)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 4 or (5\/6\/7\/8)\u003cbr\u003eOptions: Street A\u003cbr\u003eAdditional Infos: 2000, 2000T, \u003cbr\u003e\u003cbr\u003e The SPORT S was developed following the SPORT R specifications, but with damping force, sprint rates and stroke geared toward the streets, making them the ultimate weapon for users who like to track their daily car, without sacrificing too much on the comfort side.\u003cbr\u003eTo make the coilovers more street friendly, the rear upper mounts are made from reinforced rubber, increasing the ride comfort while reducing the noise.\u003cbr\u003e\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003e24-Step Adjustment Range:\u003cbr\u003ePatented Cusco needle-valves are precision fitted for precise adjustments .\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:27:10+08:00","created_at":"2018-10-25T23:27:12+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["1993","1994","1995","1996","1997","1998","coilover-kits","coilovers-and-springs","cusco-japan","cusco-japan25","dampening-and-height-adjustable","nissan","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4"],"price":259920,"price_min":259920,"price_max":259920,"available":true,"price_varies":false,"compare_at_price":324840,"compare_at_price_min":324840,"compare_at_price_max":324840,"compare_at_price_varies":false,"variants":[{"id":16766300684399,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"222 64S CN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Sport S Coilover Kit - Nissan Silvia S14","public_title":null,"options":["Default Title"],"price":259920,"weight":26500,"compare_at_price":324840,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-S_ec5e4da6-c8cc-444b-90d7-543671371d89.jpg?v=1571709563"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-S_ec5e4da6-c8cc-444b-90d7-543671371d89.jpg?v=1571709563","options":["Title"],"media":[{"alt":"Cusco Japan - Sport S Coilover Kit - Nissan Silvia S14 - 222 64S CN - Rzcrewgarage","id":1287575634031,"position":1,"preview_image":{"aspect_ratio":1.344,"height":372,"width":500,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-S_ec5e4da6-c8cc-444b-90d7-543671371d89.jpg?v=1571709563"},"aspect_ratio":1.344,"height":372,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Sport-S_ec5e4da6-c8cc-444b-90d7-543671371d89.jpg?v=1571709563","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 222 64S CN\u003cbr\u003eType: Sport S Ref 222 64S CN\u003cbr\u003eFront Specs: 24 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -70 to -20 ? -65 to 0\u003cbr\u003eMaximum adjustment F\/R: - ? -\u003cbr\u003eSpring Rates (Kg): 7 or (6\/8\/9\/10)\u003cbr\u003e\u003cbr\u003eRear Specs: 24 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 4 or (5\/6\/7\/8)\u003cbr\u003eOptions: Street A\u003cbr\u003eAdditional Infos: 2000, 2000T, \u003cbr\u003e\u003cbr\u003e The SPORT S was developed following the SPORT R specifications, but with damping force, sprint rates and stroke geared toward the streets, making them the ultimate weapon for users who like to track their daily car, without sacrificing too much on the comfort side.\u003cbr\u003eTo make the coilovers more street friendly, the rear upper mounts are made from reinforced rubber, increasing the ride comfort while reducing the noise.\u003cbr\u003e\u003cbr\u003eMonotube Construction: \u003cbr\u003eBy allowing for a larger diameter piston for rigidity and creating a larger volume chamber, the system allows for higher range of piston speeds, and finer level of damper control at all stroke speeds.\u003cbr\u003e\u003cbr\u003e24-Step Adjustment Range:\u003cbr\u003ePatented Cusco needle-valves are precision fitted for precise adjustments .\u003cbr\u003e\u003cbr\u003eFull Length Adjustment:\u003cbr\u003eThe damper body case is made to allow for maximum height adjustment without influencing the spring preloads.\u003cbr\u003e As the damper stroke can be adjusted independently, the stroke\/spring relation can remain ideal regardless of the height setting, enhancing the handling limits all the while providing a compliant ride and suspension functionnality.\u003cbr\u003e\u003cbr\u003eCusco Sport \"Blue Spring\":\u003cbr\u003eThe springs are shot-peened and wound using advanced anti-sagging metallurgy process.\u003cbr\u003e\u003cbr\u003ePrecision Crafted Upper Mounts:\u003cbr\u003eThese upper mounts are made with standard camber adjusments, or with Cusco's new \"CC\" Camber\/Caster adjustable units, optimising alignment for even finer adjustments.\u003cbr\u003e\u003cbr\u003eInverted Piston Design:\u003cbr\u003eall McPherson strut type applications come with inverted piston for superior durability and more precise performance as well.\u003cbr\u003e\u003cbr\u003eLower Bracket Camber Adjustment:\u003cbr\u003eThe lower bracket allows for additional camber to be dialed in through the use of correction bolts supplied with some McPherson type suspension units.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1778138447983,"title":"Cusco Japan - Street Zero A Coilover Kit - Nissan Silvia S14","handle":"cusco-japan-street-zero-a-coilover-kit-nissan-silvia-s14-222-61n-cn","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 222 61N CN\u003cbr\u003eType: Cusco Street Zero A Ref 222 61N CN\u003cbr\u003eFront Specs: 40 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -55 to 0 ? -60 to 0\u003cbr\u003eMaximum adjustment F\/R: -93 to 0 ? -84 to 0\u003cbr\u003eSpring Rates (Kg): 8 or (7\/9\/10)\u003cbr\u003e\u003cbr\u003eRear Specs: 40 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 6 or (5\/7\/8\/9)\u003cbr\u003eOptions: Front and rear come with Pillow ball upper mounts : +JPY20,000-\u003cbr\u003eAdditional Infos: e-con2 Compatible, Product Code?00B 60J 1214, \u003cbr\u003e\u003cbr\u003e The Street ZERO-A features a full height adjustable system enables the perfect ride height adjustment without sacrificing damper stroke or spring preload. The newly developed 40 way adjustable twin-tube shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition.\u003cbr\u003eFactory upper mounts are re- used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback.\u003cbr\u003e\u003cbr\u003eEach coilover suspension is specially valved and dimensionally designed per vehicle application. The new CPRV valve is a pressure dependent system where it prevents the piston speed from falling below a sufficient \"comfort\" level. This suspension coilover unit does it all, from street to circuit, and its 40 way needle valve dampening characteristics can be changed with a single push of a button. (via Econ2). \u003cbr\u003e\u003cbr\u003eCPRV Internal Pressure Valve Technology\u003cbr\u003eA pressure dependant bypass is designed at the base of the damper rod where the amount of hydraulic fluid passes through is automatically compensated for the perfect dampening rate. This feature serves vital when the dampening approaches a dangerously low level typically experienced at the low and mid shock dampening rate. \u003cbr\u003e\u003cbr\u003eSpecs: \u003cbr\u003e\u003cbr\u003e40 way adjustable needle valve shock absorber w\/ CPRV base valve\u003cbr\u003eLow compression twin-tube shock absorber\u003cbr\u003eFull height adjustable structure, for full shock stroke capabilities\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with different metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003eECon2 Electronic Damper Control Unit compatible\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:27:08+08:00","created_at":"2018-10-25T23:27:10+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["1993","1994","1995","1996","1997","1998","coilover-kits","coilovers-and-springs","cusco-japan","cusco-japan25","dampening-and-height-adjustable","nissan","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4"],"price":192720,"price_min":192720,"price_max":192720,"available":true,"price_varies":false,"compare_at_price":240960,"compare_at_price_min":240960,"compare_at_price_max":240960,"compare_at_price_varies":false,"variants":[{"id":16766300258415,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"222 61N CN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Street Zero A Coilover Kit - Nissan Silvia S14","public_title":null,"options":["Default Title"],"price":192720,"weight":26500,"compare_at_price":240960,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_090dd9b2-6366-4b4c-b3e8-42f1b29f1f50.jpg?v=1571709562"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_090dd9b2-6366-4b4c-b3e8-42f1b29f1f50.jpg?v=1571709562","options":["Title"],"media":[{"alt":"Cusco Japan - Street Zero A Coilover Kit - Nissan Silvia S14 - 222 61N CN - Rzcrewgarage","id":1287575306351,"position":1,"preview_image":{"aspect_ratio":1.645,"height":1084,"width":1783,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_090dd9b2-6366-4b4c-b3e8-42f1b29f1f50.jpg?v=1571709562"},"aspect_ratio":1.645,"height":1084,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero-A_090dd9b2-6366-4b4c-b3e8-42f1b29f1f50.jpg?v=1571709562","width":1783}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 222 61N CN\u003cbr\u003eType: Cusco Street Zero A Ref 222 61N CN\u003cbr\u003eFront Specs: 40 steps Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -55 to 0 ? -60 to 0\u003cbr\u003eMaximum adjustment F\/R: -93 to 0 ? -84 to 0\u003cbr\u003eSpring Rates (Kg): 8 or (7\/9\/10)\u003cbr\u003e\u003cbr\u003eRear Specs: 40 steps Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 6 or (5\/7\/8\/9)\u003cbr\u003eOptions: Front and rear come with Pillow ball upper mounts : +JPY20,000-\u003cbr\u003eAdditional Infos: e-con2 Compatible, Product Code?00B 60J 1214, \u003cbr\u003e\u003cbr\u003e The Street ZERO-A features a full height adjustable system enables the perfect ride height adjustment without sacrificing damper stroke or spring preload. The newly developed 40 way adjustable twin-tube shock absorber system enables a wide range of suspension setting suitable for virtually any given road condition.\u003cbr\u003eFactory upper mounts are re- used for those who prefer comfort, or Cusco pillowball upper mounts (sold separately) can be incorporated into the kit for more adjustment capabilities and direct road feedback.\u003cbr\u003e\u003cbr\u003eEach coilover suspension is specially valved and dimensionally designed per vehicle application. The new CPRV valve is a pressure dependent system where it prevents the piston speed from falling below a sufficient \"comfort\" level. This suspension coilover unit does it all, from street to circuit, and its 40 way needle valve dampening characteristics can be changed with a single push of a button. (via Econ2). \u003cbr\u003e\u003cbr\u003eCPRV Internal Pressure Valve Technology\u003cbr\u003eA pressure dependant bypass is designed at the base of the damper rod where the amount of hydraulic fluid passes through is automatically compensated for the perfect dampening rate. This feature serves vital when the dampening approaches a dangerously low level typically experienced at the low and mid shock dampening rate. \u003cbr\u003e\u003cbr\u003eSpecs: \u003cbr\u003e\u003cbr\u003e40 way adjustable needle valve shock absorber w\/ CPRV base valve\u003cbr\u003eLow compression twin-tube shock absorber\u003cbr\u003eFull height adjustable structure, for full shock stroke capabilities\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with different metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003eECon2 Electronic Damper Control Unit compatible\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1778138153071,"title":"Cusco Japan - Street Zero Coilover Kit - Nissan Silvia S14","handle":"cusco-japan-street-zero-coilover-kit-nissan-silvia-s14-222-61p-cn","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 222 61P CN\u003cbr\u003eType: Street Zero Ref 222 61P CN\u003cbr\u003eFront Specs: - Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -55 to 0 ? -60 to 0\u003cbr\u003eMaximum adjustment F\/R: -93 to 0 ? -84 to 0\u003cbr\u003eSpring Rates (Kg): 8 or (7\/9\/10)\u003cbr\u003e\u003cbr\u003eRear Specs: - Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 6 or (5\/7\/8\/9)\u003cbr\u003eOptions: Front and rear come with Pillow ball upper mounts : +JPY20,000-\u003cbr\u003eAdditional Infos: 222 61P CN\u003cbr\u003e\u003cbr\u003e The STREET ZERO series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is designed as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at a competitive price point.\u003cbr\u003e\u003cbr\u003eThe newly developed twin tube shock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. *8 way rear dampers on selected models. This suspension coilover basically is a full ride height adjustable system where the shock absorber stroke and spring pre-load rate is retained no matter what the vehicle ride height is set at.\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003eLow compression twin-tube shock absorber with redesigned base valve\u003cbr\u003eFull height adjustable structure \u0026amp; fixed damper set at most ideal rate\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e8 way rear adjustable shocks included with some models\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T23:27:05+08:00","created_at":"2018-10-25T23:27:07+08:00","vendor":"Cusco Japan","type":"Coilovers and Springs","tags":["1993","1994","1995","1996","1997","1998","coilover-kits","coilovers-and-springs","cusco-japan","cusco-japan25","height-adjustable","nissan","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4"],"price":180960,"price_min":180960,"price_max":180960,"available":true,"price_varies":false,"compare_at_price":226200,"compare_at_price_min":226200,"compare_at_price_max":226200,"compare_at_price_varies":false,"variants":[{"id":16766299471983,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"222 61P CN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cusco Japan - Street Zero Coilover Kit - Nissan Silvia S14","public_title":null,"options":["Default Title"],"price":180960,"weight":26500,"compare_at_price":226200,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_e585de13-d37c-4673-8306-79dcaf10d4c6.jpg?v=1571709562"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_e585de13-d37c-4673-8306-79dcaf10d4c6.jpg?v=1571709562","options":["Title"],"media":[{"alt":"Cusco Japan - Street Zero Coilover Kit - Nissan Silvia S14 - 222 61P CN - Rzcrewgarage","id":1287575175279,"position":1,"preview_image":{"aspect_ratio":1.644,"height":1084,"width":1782,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_e585de13-d37c-4673-8306-79dcaf10d4c6.jpg?v=1571709562"},"aspect_ratio":1.644,"height":1084,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Cusco-Street-Zero_e585de13-d37c-4673-8306-79dcaf10d4c6.jpg?v=1571709562","width":1782}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Cusco Japan\u003cbr\u003ePart Number: 222 61P CN\u003cbr\u003eType: Street Zero Ref 222 61P CN\u003cbr\u003eFront Specs: - Full-length Adjustable\u003cbr\u003eRecommended Height F\/R: -55 to 0 ? -60 to 0\u003cbr\u003eMaximum adjustment F\/R: -93 to 0 ? -84 to 0\u003cbr\u003eSpring Rates (Kg): 8 or (7\/9\/10)\u003cbr\u003e\u003cbr\u003eRear Specs: - Full-length Adjustable\u003cbr\u003eSpring Rates (Kg): 6 or (5\/7\/8\/9)\u003cbr\u003eOptions: Front and rear come with Pillow ball upper mounts : +JPY20,000-\u003cbr\u003eAdditional Infos: 222 61P CN\u003cbr\u003e\u003cbr\u003e The STREET ZERO series suspension coilover system is designed to provide a lowered vehicle ride height while maintaining comfort for daily driven street cars. The entire system is designed as an entry-level street coilover where the budget-minded enthusiast will get the very best suspension at a competitive price point.\u003cbr\u003e\u003cbr\u003eThe newly developed twin tube shock absorber features a virtually noiseless design due to its internal low compression gas. A new base valve design enables a comfortable and mild ride that adapts to almost any street condition, set at the most ideal damper rate from factory. *8 way rear dampers on selected models. This suspension coilover basically is a full ride height adjustable system where the shock absorber stroke and spring pre-load rate is retained no matter what the vehicle ride height is set at.\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003eLow compression twin-tube shock absorber with redesigned base valve\u003cbr\u003eFull height adjustable structure \u0026amp; fixed damper set at most ideal rate\u003cbr\u003ePrecision cut shock case thread with special coating\u003cbr\u003eQuiet operation\u003cbr\u003eRibbed lower bracket made with specific metal according to each vehicle\u003cbr\u003eEach suspension exceeds over 500 hours of elemental testing standards\u003cbr\u003e8 way rear adjustable shocks included with some models\u003cbr\u003e\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1777392975983,"title":"Aragosta Type ECoilover Kit - Nissan Silvia S14 - Pillow Ball Mount","handle":"aragosta-type-ecoilover-kit-nissan-silvia-s14-pillow-ball-mount-n7-e1-r00","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Aragosta\u003cbr\u003ePart Number: N7.E1.R00\u003cbr\u003eFront:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Camber Adjustable Pillow Ball Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Adjustment Range: + 40mm ~ -25mm\u003cbr\u003e- Spring Rate: 7kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Fixed Camber Rubber Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Height Adjustment Range: + 15mm ~ -40mm\u003cbr\u003e- Spring Rate: 5kg\u003cbr\u003e\u003cbr\u003e Aragosta's Type-E series of dampers are designed with both spirited street driving and comfortable cruising in mind. The Type-E includes several of high tech features of their Type-S and Type-SS high performance coilovers, including low-friction, WPC-treated inverted struts, height-adjustable Rana springs, specially formulated synthetic damper fluid and Aragosta's unique low friction seals. Additionally, the Type-E features 12-step rebound adjustment knobs (not available for some vehicles) on the bottom of each damper, as well as pillowball upper mounts (camber adjustable mounts available for some applications).\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T18:49:05+08:00","created_at":"2018-10-25T18:49:05+08:00","vendor":"Aragosta","type":"Coilovers and Springs","tags":["1993","1994","1995","1996","1997","1998","aragosta","aragosta25","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","nissan","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4"],"price":273720,"price_min":273720,"price_max":273720,"available":true,"price_varies":false,"compare_at_price":288120,"compare_at_price_min":288120,"compare_at_price_max":288120,"compare_at_price_varies":false,"variants":[{"id":16761283084399,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"N7.E1.R00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Aragosta Type ECoilover Kit - Nissan Silvia S14 - Pillow Ball Mount","public_title":null,"options":["Default Title"],"price":273720,"weight":22000,"compare_at_price":288120,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_E_b9fb2aa5-8fce-47c4-8b18-57955c67f30c.jpg?v=1571709555"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_E_b9fb2aa5-8fce-47c4-8b18-57955c67f30c.jpg?v=1571709555","options":["Title"],"media":[{"alt":"Aragosta Type ECoilover Kit - Nissan Silvia S14 - Pillow Ball Mount - N7.E1.R00 - Rzcrewgarage","id":1286799687791,"position":1,"preview_image":{"aspect_ratio":1.0,"height":254,"width":254,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_E_b9fb2aa5-8fce-47c4-8b18-57955c67f30c.jpg?v=1571709555"},"aspect_ratio":1.0,"height":254,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_E_b9fb2aa5-8fce-47c4-8b18-57955c67f30c.jpg?v=1571709555","width":254}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Aragosta\u003cbr\u003ePart Number: N7.E1.R00\u003cbr\u003eFront:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Camber Adjustable Pillow Ball Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Adjustment Range: + 40mm ~ -25mm\u003cbr\u003e- Spring Rate: 7kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Fixed Camber Rubber Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Height Adjustment Range: + 15mm ~ -40mm\u003cbr\u003e- Spring Rate: 5kg\u003cbr\u003e\u003cbr\u003e Aragosta's Type-E series of dampers are designed with both spirited street driving and comfortable cruising in mind. The Type-E includes several of high tech features of their Type-S and Type-SS high performance coilovers, including low-friction, WPC-treated inverted struts, height-adjustable Rana springs, specially formulated synthetic damper fluid and Aragosta's unique low friction seals. Additionally, the Type-E features 12-step rebound adjustment knobs (not available for some vehicles) on the bottom of each damper, as well as pillowball upper mounts (camber adjustable mounts available for some applications).\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1777391075439,"title":"Aragosta Type ECoilover Kit - Nissan Silvia S14 - Pillow Ball Mount","handle":"aragosta-type-ecoilover-kit-nissan-silvia-s14-pillow-ball-mount-n7-e1-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Aragosta\u003cbr\u003ePart Number: N7.E1.000\u003cbr\u003eFront:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Camber Adjustable Pillow Ball Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Adjustment Range: + 40mm ~ -25mm\u003cbr\u003e- Spring Rate: 7kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Fixed Camber Pillow Ball Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Height Adjustment Range: + 15mm ~ -40mm\u003cbr\u003e- Spring Rate: 5kg\u003cbr\u003e\u003cbr\u003e Aragosta's Type-E series of dampers are designed with both spirited street driving and comfortable cruising in mind. The Type-E includes several of high tech features of their Type-S and Type-SS high performance coilovers, including low-friction, WPC-treated inverted struts, height-adjustable Rana springs, specially formulated synthetic damper fluid and Aragosta's unique low friction seals. Additionally, the Type-E features 12-step rebound adjustment knobs (not available for some vehicles) on the bottom of each damper, as well as pillowball upper mounts (camber adjustable mounts available for some applications).\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T18:48:27+08:00","created_at":"2018-10-25T18:48:28+08:00","vendor":"Aragosta","type":"Coilovers and Springs","tags":["1993","1994","1995","1996","1997","1998","aragosta","aragosta25","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","nissan","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4"],"price":280320,"price_min":280320,"price_max":280320,"available":true,"price_varies":false,"compare_at_price":295080,"compare_at_price_min":295080,"compare_at_price_max":295080,"compare_at_price_varies":false,"variants":[{"id":16761277284463,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"N7.E1.000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Aragosta Type ECoilover Kit - Nissan Silvia S14 - Pillow Ball Mount","public_title":null,"options":["Default Title"],"price":280320,"weight":22000,"compare_at_price":295080,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_E_54c96732-32e6-4795-9310-d8e338efc2b6.jpg?v=1571709554"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_E_54c96732-32e6-4795-9310-d8e338efc2b6.jpg?v=1571709554","options":["Title"],"media":[{"alt":"Aragosta Type ECoilover Kit - Nissan Silvia S14 - Pillow Ball Mount - N7.E1.000 - Rzcrewgarage","id":1286798442607,"position":1,"preview_image":{"aspect_ratio":1.0,"height":254,"width":254,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_E_54c96732-32e6-4795-9310-d8e338efc2b6.jpg?v=1571709554"},"aspect_ratio":1.0,"height":254,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_E_54c96732-32e6-4795-9310-d8e338efc2b6.jpg?v=1571709554","width":254}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Aragosta\u003cbr\u003ePart Number: N7.E1.000\u003cbr\u003eFront:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Camber Adjustable Pillow Ball Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Adjustment Range: + 40mm ~ -25mm\u003cbr\u003e- Spring Rate: 7kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Fixed Camber Pillow Ball Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Height Adjustment Range: + 15mm ~ -40mm\u003cbr\u003e- Spring Rate: 5kg\u003cbr\u003e\u003cbr\u003e Aragosta's Type-E series of dampers are designed with both spirited street driving and comfortable cruising in mind. The Type-E includes several of high tech features of their Type-S and Type-SS high performance coilovers, including low-friction, WPC-treated inverted struts, height-adjustable Rana springs, specially formulated synthetic damper fluid and Aragosta's unique low friction seals. Additionally, the Type-E features 12-step rebound adjustment knobs (not available for some vehicles) on the bottom of each damper, as well as pillowball upper mounts (camber adjustable mounts available for some applications).\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1777366237295,"title":"Aragosta Type SCoilover Kit - Nissan Silvia S14 - Rubber Mount","handle":"aragosta-type-scoilover-kit-nissan-silvia-s14-rubber-mount-n7-a1-r00","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Aragosta\u003cbr\u003ePart Number: N7.A1.R00\u003cbr\u003eFront:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Camber Adjustable Pillow Ball Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Adjustment Range: + 40mm ~ -25mm\u003cbr\u003e- Spring Rate: 8kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Fixed Camber Rubber Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Height Adjustment Range: + 15mm ~ -40mm\u003cbr\u003e- Spring Rate: 6kg\u003cbr\u003e\u003cbr\u003e Aragosta's Type-S series of dampers are designed with both comfortable street cruising, as well as track-use in mind. The Type-S includes many high tech features, including low-friction, WPC-treated inverted struts, height-adjustable Rana springs, Kashima-coated forged aluminum cylinders, specially formulated synthetic damper fluid and Aragosta's unique low friction seals. Additionally, the Type-S features 12-step rebound adjustment knobs on the bottom of each damper, as well as pillowball upper mounts.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T18:43:46+08:00","created_at":"2018-10-25T18:43:47+08:00","vendor":"Aragosta","type":"Coilovers and Springs","tags":["1993","1994","1995","1996","1997","1998","aragosta","aragosta25","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","nissan","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4"],"price":311280,"price_min":311280,"price_max":311280,"available":true,"price_varies":false,"compare_at_price":327600,"compare_at_price_min":327600,"compare_at_price_max":327600,"compare_at_price_varies":false,"variants":[{"id":16761220005999,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"N7.A1.R00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Aragosta Type SCoilover Kit - Nissan Silvia S14 - Rubber Mount","public_title":null,"options":["Default Title"],"price":311280,"weight":22000,"compare_at_price":327600,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_S_a33151e6-6ab9-473d-ac7e-42307e6c60d0.jpg?v=1571709549"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_S_a33151e6-6ab9-473d-ac7e-42307e6c60d0.jpg?v=1571709549","options":["Title"],"media":[{"alt":"Aragosta Type SCoilover Kit - Nissan Silvia S14 - Rubber Mount - N7.A1.R00 - Rzcrewgarage","id":1286785269871,"position":1,"preview_image":{"aspect_ratio":1.0,"height":249,"width":249,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_S_a33151e6-6ab9-473d-ac7e-42307e6c60d0.jpg?v=1571709549"},"aspect_ratio":1.0,"height":249,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_S_a33151e6-6ab9-473d-ac7e-42307e6c60d0.jpg?v=1571709549","width":249}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Aragosta\u003cbr\u003ePart Number: N7.A1.R00\u003cbr\u003eFront:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Camber Adjustable Pillow Ball Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Adjustment Range: + 40mm ~ -25mm\u003cbr\u003e- Spring Rate: 8kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Fixed Camber Rubber Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Height Adjustment Range: + 15mm ~ -40mm\u003cbr\u003e- Spring Rate: 6kg\u003cbr\u003e\u003cbr\u003e Aragosta's Type-S series of dampers are designed with both comfortable street cruising, as well as track-use in mind. The Type-S includes many high tech features, including low-friction, WPC-treated inverted struts, height-adjustable Rana springs, Kashima-coated forged aluminum cylinders, specially formulated synthetic damper fluid and Aragosta's unique low friction seals. Additionally, the Type-S features 12-step rebound adjustment knobs on the bottom of each damper, as well as pillowball upper mounts.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1777361977455,"title":"Aragosta Type SCoilover Kit - Nissan Silvia S14 - Pillow Ball Mount","handle":"aragosta-type-scoilover-kit-nissan-silvia-s14-pillow-ball-mount-n7-a1-000","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Aragosta\u003cbr\u003ePart Number: N7.A1.000\u003cbr\u003eFront:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Camber Adjustable Pillow Ball Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Adjustment Range: + 40mm ~ -25mm\u003cbr\u003e- Spring Rate: 8kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Fixed Camber Pillow Ball Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Height Adjustment Range: + 15mm ~ -40mm\u003cbr\u003e- Spring Rate: 6kg\u003cbr\u003e\u003cbr\u003e Aragosta's Type-S series of dampers are designed with both comfortable street cruising, as well as track-use in mind. The Type-S includes many high tech features, including low-friction, WPC-treated inverted struts, height-adjustable Rana springs, Kashima-coated forged aluminum cylinders, specially formulated synthetic damper fluid and Aragosta's unique low friction seals. Additionally, the Type-S features 12-step rebound adjustment knobs on the bottom of each damper, as well as pillowball upper mounts.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!","published_at":"2018-10-25T18:43:14+08:00","created_at":"2018-10-25T18:43:15+08:00","vendor":"Aragosta","type":"Coilovers and Springs","tags":["1993","1994","1995","1996","1997","1998","aragosta","aragosta25","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","nissan","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4"],"price":317760,"price_min":317760,"price_max":317760,"available":true,"price_varies":false,"compare_at_price":334440,"compare_at_price_min":334440,"compare_at_price_max":334440,"compare_at_price_varies":false,"variants":[{"id":16761211093103,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"N7.A1.000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Aragosta Type SCoilover Kit - Nissan Silvia S14 - Pillow Ball Mount","public_title":null,"options":["Default Title"],"price":317760,"weight":22000,"compare_at_price":334440,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_S_58ee217f-bde2-401f-90cb-eb57f0482fc3.jpg?v=1571709548"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_S_58ee217f-bde2-401f-90cb-eb57f0482fc3.jpg?v=1571709548","options":["Title"],"media":[{"alt":"Aragosta Type SCoilover Kit - Nissan Silvia S14 - Pillow Ball Mount - N7.A1.000 - Rzcrewgarage","id":1286783828079,"position":1,"preview_image":{"aspect_ratio":1.0,"height":249,"width":249,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_S_58ee217f-bde2-401f-90cb-eb57f0482fc3.jpg?v=1571709548"},"aspect_ratio":1.0,"height":249,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Aragosta_Type_S_58ee217f-bde2-401f-90cb-eb57f0482fc3.jpg?v=1571709548","width":249}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Aragosta\u003cbr\u003ePart Number: N7.A1.000\u003cbr\u003eFront:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Camber Adjustable Pillow Ball Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Adjustment Range: + 40mm ~ -25mm\u003cbr\u003e- Spring Rate: 8kg\u003cbr\u003e\u003cbr\u003eRear:\u003cbr\u003e- Damping Adjustable: Yes\u003cbr\u003e- Height Adjustable: Yes\u003cbr\u003e- Mount: Fixed Camber Pillow Ball Mount\u003cbr\u003e- Vehicle Height: -25mm\u003cbr\u003e- Height Adjustment Range: + 15mm ~ -40mm\u003cbr\u003e- Spring Rate: 6kg\u003cbr\u003e\u003cbr\u003e Aragosta's Type-S series of dampers are designed with both comfortable street cruising, as well as track-use in mind. The Type-S includes many high tech features, including low-friction, WPC-treated inverted struts, height-adjustable Rana springs, Kashima-coated forged aluminum cylinders, specially formulated synthetic damper fluid and Aragosta's unique low friction seals. Additionally, the Type-S features 12-step rebound adjustment knobs on the bottom of each damper, as well as pillowball upper mounts.\u003c!--split--\u003e\u003cstrong\u003eTaxes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTVA \/ IVA \/ VAT: \u003c\/strong\u003eAll import taxes (TVA \/ IVA \/ VAT) are included in our pricing. No other taxes will be charged to you during delivery!\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cstrong\u003eShipping: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis product will be shipped from our Japanese Warehouse to our European Warehouse and redistributed in Europe!Shipping via DHL within 3 to 7 days depending on location and local custom check. Allow two additional days for order processing.\u003cbr\u003eEvery Monday our team keeps you in the loop by sending out an \"estimated time of arrival\" email.\u003c!--split--\u003eThis part Fits :\u003cbr\u003e\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | TC | SR20DET | I4\u003cbr\u003eSilvia | S14 Zenki | 1993-1996 | NA | SR20DE | I4\u003cbr\u003eSilvia | S14 Kouki | 1996-1998 | NA | SR20DE | I4\u003c!--split--\u003eThe RZCrew team listed this item for its performance and trusted reliability.\u003cbr\u003eReliable coilovers are important for your safety, don't settle for cheap parts that fail. Buy original!"}

{"id":1443302899823,"title":"Blitz - ZZ-R DSC Coilover Kit - Nissan Silvia S14","handle":"blitz-zz-r-dsc-coilovers-nissan-silvia-s14-93755","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 93755\u003cbr\u003eType: ZZ-R DSC\u003cbr\u003eRef: 93755\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ +20mm\u003cbr\u003eTop Mount: Adjustable Pillowball Mount\u003cbr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eHeight Adjustment Range: -65mm ~ +20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e Please note that the DSC system has now been replaced by the DSC Plus system. The new following part number apply: 93755---\u0026gt;98755The ZZ-R DSC coilover series are standard ZZ-R coilovers enhanced with a motorized system to adjust the dampening rates from inside the passenger cabin.\u003cbr\u003e\nThey are full length adjustable, featuring up to 96-steps dampening force adjustment managed by the motorized system.\u003cbr\u003e\nThe precision of dampening can be adjusted from the car controller between 32\/64\/96 steps\u003cbr\u003e\nThe dampening of the coilovers can be controlled left\/right, or each coilover individually, and up to 5 settings can be stored in the controller.\u003cbr\u003e\nThe controller has a \"Highway Mode\" which auto adjusts the dampening according to the speed.\u003cbr\u003e\nThey are developped to be street and track friendly and use aluminum upper mounts, lock seats and brackets for rigidity and weight savings.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R DSC are rebuildable coilovers.\u003c!--split--\u003eType: ZZ-R DSC\u003cbr\u003eRef: 93755\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ +20mm\u003cbr\u003eTop Mount: Adjustable Pillowball Mount\u003chr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eHeight Adjustment Range: -65mm ~ +20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2018-08-24T16:04:09+08:00","created_at":"2018-08-24T16:04:10+08:00","vendor":"Blitz","type":"Coilovers and Springs","tags":["1993","1994","1995","1996","1997","1998","blitz","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","nissan","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4","ws142"],"price":179230,"price_min":179230,"price_max":179230,"available":false,"price_varies":false,"compare_at_price":274400,"compare_at_price_min":274400,"compare_at_price_max":274400,"compare_at_price_varies":false,"variants":[{"id":12964070129775,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"93755","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Blitz - ZZ-R DSC Coilover Kit - Nissan Silvia S14","public_title":null,"options":["Default Title"],"price":179230,"weight":32500,"compare_at_price":274400,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/ZZ-RDSC_e338005d-fb10-48f8-b131-da6ec528a234.jpg?v=1667725714"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/ZZ-RDSC_e338005d-fb10-48f8-b131-da6ec528a234.jpg?v=1667725714","options":["Title"],"media":[{"alt":"Blitz - ZZ-R DSC Coilovers - Nissan Silvia S14 - 93755 - Rzcrewgarage","id":32125073621267,"position":1,"preview_image":{"aspect_ratio":1.673,"height":849,"width":1420,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/ZZ-RDSC_e338005d-fb10-48f8-b131-da6ec528a234.jpg?v=1667725714"},"aspect_ratio":1.673,"height":849,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/ZZ-RDSC_e338005d-fb10-48f8-b131-da6ec528a234.jpg?v=1667725714","width":1420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 93755\u003cbr\u003eType: ZZ-R DSC\u003cbr\u003eRef: 93755\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ +20mm\u003cbr\u003eTop Mount: Adjustable Pillowball Mount\u003cbr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eHeight Adjustment Range: -65mm ~ +20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e Please note that the DSC system has now been replaced by the DSC Plus system. The new following part number apply: 93755---\u0026gt;98755The ZZ-R DSC coilover series are standard ZZ-R coilovers enhanced with a motorized system to adjust the dampening rates from inside the passenger cabin.\u003cbr\u003e\nThey are full length adjustable, featuring up to 96-steps dampening force adjustment managed by the motorized system.\u003cbr\u003e\nThe precision of dampening can be adjusted from the car controller between 32\/64\/96 steps\u003cbr\u003e\nThe dampening of the coilovers can be controlled left\/right, or each coilover individually, and up to 5 settings can be stored in the controller.\u003cbr\u003e\nThe controller has a \"Highway Mode\" which auto adjusts the dampening according to the speed.\u003cbr\u003e\nThey are developped to be street and track friendly and use aluminum upper mounts, lock seats and brackets for rigidity and weight savings.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R DSC are rebuildable coilovers.\u003c!--split--\u003eType: ZZ-R DSC\u003cbr\u003eRef: 93755\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ +20mm\u003cbr\u003eTop Mount: Adjustable Pillowball Mount\u003chr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eHeight Adjustment Range: -65mm ~ +20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003c!--split--\u003e\u003c!--split--\u003e"}

{"id":1443302867055,"title":"Blitz - ZZ-R Coilover Kit - Nissan Silvia S14","handle":"blitz-zz-r-coilovers-nissan-silvia-s14-92755","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 92755\u003cbr\u003eType: ZZ-R\u003cbr\u003eRef: 92755\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ +20mm\u003cbr\u003eTop Mount: Adjustable Pillowball Mount\u003cbr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eHeight Adjustment Range: -65mm ~ +20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e The Blitz ZZ-R coilovers are full-length adjustable monotube coilovers featuring a 32-step dampening force adjustment.\u003cbr\u003e\nThey are developped to be street and track friendly and use aluminum upper mounts, lock seats and brackets for rigidity and weight savings.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R are rebuildable coilovers.\u003c!--split--\u003eType: ZZ-R\u003cbr\u003eRef: 92755\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ +20mm\u003cbr\u003eTop Mount: Adjustable Pillowball Mount\u003chr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eHeight Adjustment Range: -65mm ~ +20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003c!--split--\u003e\u003c!--split--\u003e","published_at":"2018-08-24T16:04:08+08:00","created_at":"2018-08-24T16:04:09+08:00","vendor":"Blitz","type":"Coilovers and Springs","tags":["1993","1994","1995","1996","1997","1998","blitz","coilover-kits","coilovers-and-springs","dampening-and-height-adjustable","nissan","silvia-s14-kouki-1996-1998-na-sr20de-i4","silvia-s14-kouki-1996-1998-tc-sr20det-i4","silvia-s14-zenki-1993-1996-na-sr20de-i4","silvia-s14-zenki-1993-1996-tc-sr20det-i4","ws142"],"price":162924,"price_min":162924,"price_max":162924,"available":true,"price_varies":false,"compare_at_price":241800,"compare_at_price_min":241800,"compare_at_price_max":241800,"compare_at_price_varies":false,"variants":[{"id":12964069900399,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"92755","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Blitz - ZZ-R Coilover Kit - Nissan Silvia S14","public_title":null,"options":["Default Title"],"price":162924,"weight":30000,"compare_at_price":241800,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_ZZ-R_3074e0cc-eda3-4f85-9ed9-560f266eee2c.jpg?v=1667725710"],"featured_image":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_ZZ-R_3074e0cc-eda3-4f85-9ed9-560f266eee2c.jpg?v=1667725710","options":["Title"],"media":[{"alt":"Blitz - ZZ-R Coilovers - Nissan Silvia S14 - 92755 - Rzcrewgarage","id":32125073359123,"position":1,"preview_image":{"aspect_ratio":1.673,"height":837,"width":1400,"src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_ZZ-R_3074e0cc-eda3-4f85-9ed9-560f266eee2c.jpg?v=1667725710"},"aspect_ratio":1.673,"height":837,"media_type":"image","src":"\/\/www.rzcreweurope.com\/cdn\/shop\/products\/Blitz_ZZ-R_3074e0cc-eda3-4f85-9ed9-560f266eee2c.jpg?v=1667725710","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eManufacturer: Blitz\u003cbr\u003ePart Number: 92755\u003cbr\u003eType: ZZ-R\u003cbr\u003eRef: 92755\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ +20mm\u003cbr\u003eTop Mount: Adjustable Pillowball Mount\u003cbr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eHeight Adjustment Range: -65mm ~ +20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003cbr\u003e The Blitz ZZ-R coilovers are full-length adjustable monotube coilovers featuring a 32-step dampening force adjustment.\u003cbr\u003e\nThey are developped to be street and track friendly and use aluminum upper mounts, lock seats and brackets for rigidity and weight savings.\u003cbr\u003e\nThey adopt a 44mm diameter piston to supress lag in dampening and offer a smooth and reliable ride.\u003cbr\u003eThe ZZ-R are rebuildable coilovers.\u003c!--split--\u003eType: ZZ-R\u003cbr\u003eRef: 92755\u003cbr\u003eFront Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 8kg\u003cbr\u003eHeight Adjustment Range: -70mm ~ +20mm\u003cbr\u003eTop Mount: Adjustable Pillowball Mount\u003chr\u003e\u003cbr\u003eRear Specs: 32 Steps Full-Length Adjustable\u003cbr\u003eSpring Rate: 6kg\u003cbr\u003eHeight Adjustment Range: -65mm ~ +20mm\u003cbr\u003eTop Mount: Reinforced Rubber Mount\u003c!--split--\u003e\u003c!--split--\u003e"}